Led Electronic Current Detection Sensor Module Digital Display 4-20mA Relay Module Component DC12V
Led Electronic Current Detection Sensor Module Digital Display 4-20mA Relay Module Component DC12V
Hero image 0 of Led Electronic Current Detection Sensor Module Digital Display 4-20mA Relay Module Component DC12V, 0 of 8

Led Electronic Current Detection Sensor Module Digital Display 4-20mA Relay Module Component DC12V

(No ratings yet)

Key item features

  • Composed of professional PCB materials, stable performance and long service life.
  • Increase the power supply anti-reverse to reduce the risks of work errors and improve work efficiency.
  • With three-digit display, three-button adjustment is convenient and easy to use.
  • The module with small size, easy to carry and store, convenient to use and with performance.
  • Great workmanship, with strict quality control and quality assurance, high factor, can be with peace of mind.

Specs

Amps, 12 mAInput voltage, 12 VBrand, FyydesSize, 3.15" x 1.97" x 0.79"Assembled product weight, 1 lbHas written warranty, No

About this item

Product details

electronic Current Detection Sensor Module Digital Display 4-20mA Relay Module Component DC12V
Specification:
Item Type: Current Detection Sensor Module Material: PCB
Working Current: Standby: 12mA, Working: 56mA
Working Voltage: DC12V
Digital Display Life: Greater than or equal to 50,000 hours
Relay Life: Less than or equal to 100,000 times
Digital Tube: 3 in 1
Working Temperature: -20 degrees Celsius ~75 degrees Celsius
Measuring Range: 0-25mA
Detection : 4-20ma
Product Features:
4-20ma Current Detection: After the module is powered on, the PX is initially displayed and the currently set mode is displayed. At this time, the mode can be adjusted by pressing the "+" and "-" buttons. It will enter the real-time display of the measured current after 4s. Three buttons to set the upper and lower limits and function mode selection
Interface Description:
Input
Positive Pole: Connect to the positive pole of the power supply
Negative Pole: Connect to the negative pole of the power supply
AO: 4-20ma input
COM: It is connected to the negative pole of the power supply
Output
NO: NO end
COM: Public
NC: NC end
Several Modes Can be Set as Follows: Long press "-" for 3s to enter the adjustment mode
P-1: Suction exceeds the set value, but is disconnected below the set value; the measured value exceeds the lower limit value and the relay suctions, and disconnects below the lower limit value.
P-2: Disconnect when the value exceeds the set value, but is lower than the suction; when the measured value exceeds the lower limit, the relay is disconnected, and the suction is lower than the lower limit.
P-3: Suction in the interval and disconnected outside the interval; the measured value is between the upper limit and the lower limit and the relay sucks, otherwise it is disconnected
P-4: Disconnected in the interval, sucked outside the interval; the relay is disconnected between the upper limit and lower limit of the measured value, otherwise sucked
P-5: Disconnect below the lower limit, and absorb the upper limit; when the measured value exceeds the lower limit, the relay will disconnect, and the relay will absorb the upper limit.
P-6: Suction is lower than the lower limit, and it is disconnected the upper limit; the measured value exceeds the lower limit and the relay is suctioned, and the relay is disconnected the upper limit.
Setting Instructions for The Convenience Of Description, Use K1 For The setting key, K2 for the + key, and K3 for the-key:
Key Description: "K1 /adjust; K2+; K3-/mode selection
Press the K1 key, the first digit flashes, adjust the lower limit of hundreds, press K2, K3 to adjust 0~1 change
Press the K1 button, the second digit will flash, adjust the tens digit of the lower limit, press K2, K3 to adjust 0-9 changes
Press K1 key, the third lower third digit flashes, adjust the lower limit one digit, press K2, K3 to adjust 0-9 change
Press the K1 key, the 4th, lower, and fourth digits will flash, adjust the upper limit of hundreds, press K2, K3 to adjust 0~1 changes
Press K1 key, the 5th bottom fifth digit flashes, adjust the upper limit ten digits, press K2, K3 to adjust 0-9 changes
Press K1 key, the 6th, lower and sixth digits will flash, adjust the upper limit one digit, press K2, K3 to adjust 0-9 changes
Press the K1 key for the 7th time, the digital tube is not flashing, it displays the measured current value

Package List:
1 x Current Detection Sensor Module

  • Composed of professional PCB materials, stable performance and long service life.
  • Increase the power supply anti-reverse to reduce the risks of work errors and improve work efficiency.
  • With three-digit display, three-button adjustment is convenient and easy to use.
  • The module with small size, easy to carry and store, convenient to use and with performance.
  • Great workmanship, with strict quality control and quality assurance, high factor, can be with peace of mind.
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.  

Specifications

Amps

12 mA

Input voltage

12 V

Brand

Fyydes

Size

3.15" x 1.97" x 0.79"

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.

Customer ratings & reviews

0 out of 5 stars
0 ratings|0 reviews
This item does not have any reviews yet
Current price is $3.62
Price when purchased online
  • Free 90-day returns

How do you want your item?

Try 30 days for just $1! Choose a plan at checkout.
How do you want your item?
Ships to
Arrives by Sun, Nov 29
Sold by Qihe Store
Fulfilled by Walmart
3.901989683124539 out of 5 stars
3.9 stars out of 5, based on 1377 seller reviews(3.9)
Free 90-day returns
walmart plus

Try 30 days of Walmart+ for just $1!

T&C apply.