

Hero image 0 of Dual Alpine Type R R2-W10D2 10" Subs, Sealed Rearfire Box, 0 of 4
Dual Alpine Type R R2-W10D2 10" Subs, Sealed Rearfire Box
(No ratings yet)
Key item features
- Compatible with sedans, hatchbacks and SUVs with at least 30-1/4 inches of trunk or cargo width: the angled rear panel follows the slope of a rear seat so the box sits flush, and the subs fire toward the rear of the vehicle
- Two Alpine Type R R2-W10D2 10 inch subwoofers: each with dual 2 ohm 65 mm voice coils, 750 watts RMS and 2,250 watts peak power handling (CTA-2031), a 26 to 200 Hz frequency response, 82.4 dB sensitivity, a Kevlar reinforced pulp cone, a Santoprene H.A.M.R. surround, 20 mm X-Max and a 6 inch mounting depth
- RF210H enclosure: Sealed MDF box with gray carpet, 1.0 cubic foot per sub, angled rear panel, 30-1/4 x 13 inches, 13-3/4 to 16-1/2 inches deep, dual terminal cups for wire up to 10 gauge; the carpet finish gives a clean look
- Final 2 ohm load: pair this package with a mono subwoofer amplifier that is stable at 2 ohm for the best output; amp and wiring are sold separately; it is a matched, ready-to-install bass package; every part arrives in one order
Specs
Rms power rating, 1500 W
Brand, Alpine
Subwoofer enclosure type, Sealed
Peak audio power handling, 4500 W
Car speaker size class, 10"
Vehicle fitment type, Universal
Rms power rating
1500 W
Brand, Alpine
Brand
Alpine
Subwoofer enclosure type, Sealed
Subwoofer enclosure type
Sealed
Peak audio power handling, 4500 W
Peak audio power handling
4500 W
Car speaker size class, 10"
Car speaker size class
10"
Vehicle fitment type, Universal
Vehicle fitment type
Universal
About this item
Product details
This subwoofer and enclosure package pairs sealed rearfire bass with a footprint that fits most trunks and hatch areas and gives you a matched, ready-to-install bass system in one order. The angled rear panel follows the slope of a rear seat so the box sits flush, and the subs fire toward the rear of the vehicle. In the package you get two Alpine Type R R2-W10D2 10 inch subwoofers each with dual 2 ohm 65 mm voice coils, 750 watts RMS and 2,250 watts peak power handling (CTA-2031), a 26 to 200 Hz frequency response, 82.4 dB sensitivity, a Kevlar reinforced pulp cone, a Santoprene H.A.M.R. surround, 20 mm X-Max and a 6 inch mounting depth; an RF210H sealed dual 10 inch rearfire enclosure built from 5/8 inch MDF and wrapped in gray carpet, with 1.0 cubic foot of air space per sub, an angled rear panel, dual spring-loaded terminal cups for banana plugs or bare wire up to 10 gauge, and a 30-1/4 inch wide by 13 inch high footprint that tapers from 13-3/4 to 16-1/2 inches deep; and a Harmony HA-SWKD dual sub install kit with sixteen 1-5/8 inch wood screws and two 24 inch speaker leads with spade terminals. The subwoofers can be wired to a final 2 ohm load, so pair the package with a mono amplifier that is stable at that load. The enclosure arrives built, carpeted and ready for the woofers, which saves you from measuring, cutting and finishing a box yourself. An amplifier and amp wiring kit are not included with this package and are sold separately. Measure your trunk or cargo area before ordering: the box is 30-1/4 inches wide, 13 inches high and 16-1/2 inches deep at the bottom.
- Compatible with sedans, hatchbacks and SUVs with at least 30-1/4 inches of trunk or cargo width: the angled rear panel follows the slope of a rear seat so the box sits flush, and the subs fire toward the rear of the vehicle
- Two Alpine Type R R2-W10D2 10 inch subwoofers: each with dual 2 ohm 65 mm voice coils, 750 watts RMS and 2,250 watts peak power handling (CTA-2031), a 26 to 200 Hz frequency response, 82.4 dB sensitivity, a Kevlar reinforced pulp cone, a Santoprene H.A.M.R. surround, 20 mm X-Max and a 6 inch mounting depth
- RF210H enclosure: Sealed MDF box with gray carpet, 1.0 cubic foot per sub, angled rear panel, 30-1/4 x 13 inches, 13-3/4 to 16-1/2 inches deep, dual terminal cups for wire up to 10 gauge; the carpet finish gives a clean look
- Final 2 ohm load: pair this package with a mono subwoofer amplifier that is stable at 2 ohm for the best output; amp and wiring are sold separately; it is a matched, ready-to-install bass package; every part arrives in one order
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.
Specifications
Rms power rating
1500 W
Brand
Alpine
Subwoofer enclosure type
Sealed
Peak audio power handling
4500 W
Warranty
Warranty information
Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.
Customer ratings & reviews
0 out of 5 stars
This item does not have any reviews yet
Current price is USD$736.95
Price when purchased online
- Free shipping
Walmart Protection Plan by Allstate
(Only one option can be selected at a time)
How do you want your item?
Ships to
Arrives between Nov 25 - Nov 28
|Sold and shipped by HiFiSoundConnection
4.25929054054054 out of 5 stars
