Dive Rite Stainless Steel XT Lite Backplate
Dive Rite Stainless Steel XT Lite Backplate
Hero image 0 of Dive Rite Stainless Steel XT Lite Backplate, 0 of 1

Dive Rite Stainless Steel XT Lite Backplate

(No ratings yet)

Key item features

  • Dive Rite Stainless Steel XT Lite Backplate
  • The XT Lite backplate design is based on the original Dive Rite backplates produced since 1984. The lightweight design has evolved to include new features and ergonomics for the modern diver. Laser cut from a thin 14 gauge low carbon, rust resistant 316L stainless steel, the unique shape contours the diver’s back while generously rounded corners prevent the plate from digging in or damaging exposure suits. Additional internal cutouts further reduce weight and add to the plate’s unique look while still maintaining the support needed for the heaviest double cylinder configurations.  All XT Lite plates are CNC deburred guaranteeing there are no rough or sharp edges that could potentially damage harness webbing. They are then electropolished to a mirror finish and laser engraved to ensure that they look as good as they perform.

    The XT backplate is set up with 11" (27.9cm) on-center mounting holes to accommodate standard double tank bolt kits, including two hole positions for the upper bolt providing user adjustability of tank height. Two sets of 2" slots along the center channel allow divers to weave cam straps onto the backplate for single tank diving use without the need for a single tank adapter. Two pairs of holes on side tabs are positioned for use with bungees to be able to sidemount stage bottles. A series of additional holes along the outer edges of the backplate provide different options for mounting lights, pony and suit inflation bottles, lift bags, and other accessories.

    2” harness webbing slots are used throughout to accommodate either a Basic, Deluxe or Transplate style harness. 2" (50mm) and 1" (25mm) slots at the bottom center of the plate allow for any crotch strap up to 2" (50mm) in width to be used. Weighing in at 2.61 lbs (1.18 kg), lightweight stainless steel plates are an ideal option for divers who do not need additional ballast weight on their rigs.

    • 14 Gauge low carbon 316L Stainless Steel
    • Laser cut, CNC deburred edges
    • Electropolished and Laser Engraved
    • 2.6 lbs (1.18kg)
    • 5″ (26.7cm)(widest point) x 15″ (39.4cm)
    • 25″ (3.2cm) depth (with contour)
    • In-water buoyancy: -2.5 lbs (-1.13 kg)


  • By Dive Rite

Specs

Brand, Dive RiteColor, SilverMaterial, Stainless SteelModel, RG1426Has written warranty, NoPiece count, 1

About this item

Product details

The XT Lite backplate design is based on the original Dive Rite backplates produced since 1984. The lightweight design has evolved to include new features and ergonomics for the modern diver. Laser cut from a thin 14 gauge low carbon, rust resistant 316L stainless steel, the unique shape contours the diver’s back while generously rounded corners prevent the plate from digging in or damaging exposure suits. Additional internal cutouts further reduce weight and add to the plate’s unique look while still maintaining the support needed for the heaviest double cylinder configurations.  All XT Lite plates are CNC deburred guaranteeing there are no rough or sharp edges that could potentially damage harness webbing. They are then electropolished to a mirror finish and laser engraved to ensure that they look as good as they perform.

The XT backplate is set up with 11" (27.9cm) on-center mounting holes to accommodate standard double tank bolt kits, including two hole positions for the upper bolt providing user adjustability of tank height. Two sets of 2" slots along the center channel allow divers to weave cam straps onto the backplate for single tank diving use without the need for a single tank adapter. Two pairs of holes on side tabs are positioned for use with bungees to be able to sidemount stage bottles. A series of additional holes along the outer edges of the backplate provide different options for mounting lights, pony and suit inflation bottles, lift bags, and other accessories.

2” harness webbing slots are used throughout to accommodate either a Basic, Deluxe or Transplate style harness. 2" (50mm) and 1" (25mm) slots at the bottom center of the plate allow for any crotch strap up to 2" (50mm) in width to be used. Weighing in at 2.61 lbs (1.18 kg), lightweight stainless steel plates are an ideal option for divers who do not need additional ballast weight on their rigs.

  • 14 Gauge low carbon 316L Stainless Steel
  • Laser cut, CNC deburred edges
  • Electropolished and Laser Engraved
  • 2.6 lbs (1.18kg)
  • 5″ (26.7cm)(widest point) x 15″ (39.4cm)
  • 25″ (3.2cm) depth (with contour)
  • In-water buoyancy: -2.5 lbs (-1.13 kg)


  • Dive Rite Stainless Steel XT Lite Backplate
  • The XT Lite backplate design is based on the original Dive Rite backplates produced since 1984. The lightweight design has evolved to include new features and ergonomics for the modern diver. Laser cut from a thin 14 gauge low carbon, rust resistant 316L stainless steel, the unique shape contours the diver’s back while generously rounded corners prevent the plate from digging in or damaging exposure suits. Additional internal cutouts further reduce weight and add to the plate’s unique look while still maintaining the support needed for the heaviest double cylinder configurations.  All XT Lite plates are CNC deburred guaranteeing there are no rough or sharp edges that could potentially damage harness webbing. They are then electropolished to a mirror finish and laser engraved to ensure that they look as good as they perform.

    The XT backplate is set up with 11" (27.9cm) on-center mounting holes to accommodate standard double tank bolt kits, including two hole positions for the upper bolt providing user adjustability of tank height. Two sets of 2" slots along the center channel allow divers to weave cam straps onto the backplate for single tank diving use without the need for a single tank adapter. Two pairs of holes on side tabs are positioned for use with bungees to be able to sidemount stage bottles. A series of additional holes along the outer edges of the backplate provide different options for mounting lights, pony and suit inflation bottles, lift bags, and other accessories.

    2” harness webbing slots are used throughout to accommodate either a Basic, Deluxe or Transplate style harness. 2" (50mm) and 1" (25mm) slots at the bottom center of the plate allow for any crotch strap up to 2" (50mm) in width to be used. Weighing in at 2.61 lbs (1.18 kg), lightweight stainless steel plates are an ideal option for divers who do not need additional ballast weight on their rigs.

    • 14 Gauge low carbon 316L Stainless Steel
    • Laser cut, CNC deburred edges
    • Electropolished and Laser Engraved
    • 2.6 lbs (1.18kg)
    • 5″ (26.7cm)(widest point) x 15″ (39.4cm)
    • 25″ (3.2cm) depth (with contour)
    • In-water buoyancy: -2.5 lbs (-1.13 kg)


  • By Dive Rite
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.  

Specifications

Brand

Dive Rite

Color

Silver

Material

Stainless Steel

Model

RG1426

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.

Customer ratings & reviews

0 out of 5 stars
0 ratings|0 reviews
This item does not have any reviews yet
Current price is $135.00
Price when purchased online
  • Free shipping
  • Free Holiday returns until Jan 31

How do you want your item?

How do you want your item?
Ships to
Arrives by Sat, Nov 21
|
Sold and shipped by Scubadelphia Diveseekers
5 out of 5 stars
5 stars out of 5, based on 3 seller reviews(5.0)
Extended holiday returns
Free Holiday returns until Jan 31