ZEUS LINICKEL MODULE FOR S1 OBDII
ZEUS LINICKEL MODULE FOR S1 OBDII
Hero image 0 of ZEUS LINICKEL MODULE FOR S1 OBDII, 0 of 3

ZEUS LINICKEL MODULE FOR S1 OBDII

(No ratings yet)
Check if this fits your vehicle

Key item features

  • Brand :Classic Instruments
  • Model :SN73Z-S1
  • Compatible with Holley ECU Sniper, Dominator, HP, Terminator X, and Terminator X Max;

    Zeus-Link is an all-inclusive gauge interface unit that can connect to Holley ECUs (Dominator, HP, Terminator X, Terminator X Max, Sniper and Sniper 2) and to GM OBDII ports, reading vehicle data from CAN BUS to drive any Classic Instruments gauges accurately. Additional pass-through CAN port connection for other CAN devices. Customers can connect up to 6 standard gauges and 2 auxiliary gauges using all sender inputs or none. All instruments can be driven traditionally if the vehicle ECU does not support an output the driver wants to monitor. Unit features warning and check engine light outputs, dash light connection and on-board diagnostic lights to give status of power, BLE, and data. For maximum compatibility with Holley products, there is an additional resistor available if there are other CAN devices on the same harness and the Holley harness has an additional Holley ECU connector for other devices. The entire unit is setup and managed through an app available on the App Store or Google Play. Configure which gauges are in the dash, how each gets its signal, view values being received by Zeus-Link, and verify correct outputs and wiring all through the app.;
  • Addtl Handling Charge :No
  • Zeus Link Holley Sniper ECU
  • New

Specs

Manufacturer part number, SN73Z-S1Automotive electrical part & accessory type, ModulesCompatibility, Holley ECUs (Dominator, HP, Terminator X/Max, Sniper/Sniper 2), GM OBDII portsVehicle fitment type, UniversalBrand, Classic InstrumentsVehicle model, CINSN73Z-S1

About this item

Product details

Compatible with Holley ECU Sniper, Dominator, HP, Terminator X, and Terminator X Max;

Zeus-Link is an all-inclusive gauge interface unit that can connect to Holley ECUs (Dominator, HP, Terminator X, Terminator X Max, Sniper and Sniper 2) and to GM OBDII ports, reading vehicle data from CAN BUS to drive any Classic Instruments gauges accurately. Additional pass-through CAN port connection for other CAN devices. Customers can connect up to 6 standard gauges and 2 auxiliary gauges using all sender inputs or none. All instruments can be driven traditionally if the vehicle ECU does not support an output the driver wants to monitor. Unit features warning and check engine light outputs, dash light connection and on-board diagnostic lights to give status of power, BLE, and data. For maximum compatibility with Holley products, there is an additional resistor available if there are other CAN devices on the same harness and the Holley harness has an additional Holley ECU connector for other devices. The entire unit is setup and managed through an app available on the App Store or Google Play. Configure which gauges are in the dash, how each gets its signal, view values being received by Zeus-Link, and verify correct outputs and wiring all through the app.;

  • Brand :Classic Instruments
  • Model :SN73Z-S1
  • Compatible with Holley ECU Sniper, Dominator, HP, Terminator X, and Terminator X Max;

    Zeus-Link is an all-inclusive gauge interface unit that can connect to Holley ECUs (Dominator, HP, Terminator X, Terminator X Max, Sniper and Sniper 2) and to GM OBDII ports, reading vehicle data from CAN BUS to drive any Classic Instruments gauges accurately. Additional pass-through CAN port connection for other CAN devices. Customers can connect up to 6 standard gauges and 2 auxiliary gauges using all sender inputs or none. All instruments can be driven traditionally if the vehicle ECU does not support an output the driver wants to monitor. Unit features warning and check engine light outputs, dash light connection and on-board diagnostic lights to give status of power, BLE, and data. For maximum compatibility with Holley products, there is an additional resistor available if there are other CAN devices on the same harness and the Holley harness has an additional Holley ECU connector for other devices. The entire unit is setup and managed through an app available on the App Store or Google Play. Configure which gauges are in the dash, how each gets its signal, view values being received by Zeus-Link, and verify correct outputs and wiring all through the app.;
  • Addtl Handling Charge :No
  • Zeus Link Holley Sniper ECU
  • New
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.  

Specifications

Manufacturer part number

SN73Z-S1

Automotive electrical part & accessory type

Modules

Compatibility

Holley ECUs (Dominator, HP, Terminator X/Max, Sniper/Sniper 2), GM OBDII ports

Vehicle fitment type

Universal

Warranty

Warranty information

For warranty claims / info contact Manufacturer / Brand

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.

Warnings

Customer ratings & reviews

0 out of 5 stars
0 ratings|0 reviews
This item does not have any reviews yet
Current price is $415.95
Price when purchased online
  • Free shipping
  • Free 90-day returns

How do you want your item?

Try 30 days for just $1! Choose a plan at checkout.
How do you want your item?
Ships to
Arrives by Wed, Nov 18
Sold and shipped by Walmart.com
Free 90-day returns
This item is gift eligible

More seller options (1)

Starting from $425.95
walmart plus

Try 30 days of Walmart+ for just $1!

T&C apply.