CNC 50 Hour Programming Course: (Second Edition / January 2018) (Paperback)

CNC 50 Hour Programming Course: (Second Edition / January 2018) (Paperback)

(No ratings yet)

Key item features

Second edition with unlimited use of graphic simulation software, upgrade of procedures and images.This book is designed for students and teachers who are looking for a programming course in combination with a graphic simulation software.The course is based on the understanding of the 'ISO Standard' functions, i.e. the programming language at the basis of all numeric controls. The training and simulating software faithfully replicates a real numeric control on your computer.This course comprises chapters and paragraphs for both theoretical and practical learning. Paragraphs on theory contain drawings and diagrams that simplify the understanding of the text. The first practical experiences consist in the utilization of pre-drafted programs, which are useful to the participant's initial understanding of the numeric control and its potential. Later you will learn how to write new programs with difficulty levels that are commensurate to the acquired experience. During the practical exercises the reader is constantly guided by the respective operating procedures.The learning method has been developed so that even beginners may complete the course and understand all the most complex functions and programming methods.Periodical tests are offered in order to help the students and teachers assess progress achieved or to highlight the topics for review.This is a fifty-hour course. The total number of hours necessary for the understanding of the theoretical part and for carrying out the practical exercises will always be specified at the beginning of each chapter.The course is centered on a three-axis lathe (X, Z, C) with driven tools, then the concepts applied to the programming of the lathe will be used to program a three-axis vertical mill (X, Y, Z). All the programs used during the explanations and the collection of the images contained in the book, which may be printed, viewed or displayed during the course at home or in the classroom may be downloaded from the website cncwebschool.com. Finally the book contains a list of technical terms and their translation from English into Italian and German.

Specs

Publication date, November, 2013Author, Lorenzo RausaBook format, PaperbackGenre, Technology & Engineering/Mechanical, House & Home/Power ToolsPages, 376Age group, Adult, Teen

About this item

Product details

Revised and updated edition (January 2021 ) with unlimited use of graphic simulation software, upgrade of procedures and images.

This book is designed for students and teachers who are looking for a programming course in combination with a graphic simulation software. The course is based on the understanding of the 'ISO Standard' functions, i.e. the programming language at the basis of all numeric controls. The training and simulating software faithfully replicates a real numeric control on your computer.

This course comprises chapters and paragraphs for both theoretical and practical learning. Paragraphs on theory contain drawings and diagrams that simplify the understanding of the text. The first practical experiences consist in the utilization of pre-drafted programs, which are useful to the participant's initial understanding of the numeric control and its potential. Later you will learn how to write new programs with difficulty levels that are commensurate to the acquired experience. During the practical exercises the reader is constantly guided by the respective operating procedures. The learning method has been developed so that even beginners may complete the course and understand all the most complex functions and programming methods.

Periodical tests are offered in order to help the students and teachers assess progress achieved or to highlight the topics for review.

This is a fifty-hour course. The total number of hours necessary for the understanding of the theoretical part and for carrying out the practical exercises will always be specified at the beginning of each chapter. The course is centered on a three-axis lathe (X, Z, C) with driven tools, then the concepts applied to the programming of the lathe will be used to program a three-axis vertical mill (X, Y, Z). All the programs used during the explanations and the collection of the images contained in the book, which may be printed, viewed or displayed during the course at home or in the classroom may be downloaded from the website cncwebschool.com. Finally the book contains a list of technical terms and their translation from English into Italian and German.

Software Technical Requirements
Hardware
Processor 2 GHz, RAM 4 GB, Disc capacity approx. 3,3 GB full installation
Graphics card
DirectX 9 or higher with WDDM 1.0 driver, minimum resolution 800 * 600 pixels
Operating system
MS Windows 7 SP1 (32- and 64-Bit) (not supported: Starter, Web Edition and Embedded),
MS Windows 8.1 (32- and 64-Bit) (not supported: RT Edition),
MS Windows 10 (64-Bit) (not supported: Mobile and Mobile Enterprise)
User profile settings
In order to install and start up SinuTrain, you must have administrator rights.
Internet connection
The internet connection has to be active during the installation to update C++ libraries
Second edition with unlimited use of graphic simulation software, upgrade of procedures and images.This book is designed for students and teachers who are looking for a programming course in combination with a graphic simulation software.The course is based on the understanding of the 'ISO Standard' functions, i.e. the programming language at the basis of all numeric controls. The training and simulating software faithfully replicates a real numeric control on your computer.This course comprises chapters and paragraphs for both theoretical and practical learning. Paragraphs on theory contain drawings and diagrams that simplify the understanding of the text. The first practical experiences consist in the utilization of pre-drafted programs, which are useful to the participant's initial understanding of the numeric control and its potential. Later you will learn how to write new programs with difficulty levels that are commensurate to the acquired experience. During the practical exercises the reader is constantly guided by the respective operating procedures.The learning method has been developed so that even beginners may complete the course and understand all the most complex functions and programming methods.Periodical tests are offered in order to help the students and teachers assess progress achieved or to highlight the topics for review.This is a fifty-hour course. The total number of hours necessary for the understanding of the theoretical part and for carrying out the practical exercises will always be specified at the beginning of each chapter.The course is centered on a three-axis lathe (X, Z, C) with driven tools, then the concepts applied to the programming of the lathe will be used to program a three-axis vertical mill (X, Y, Z). All the programs used during the explanations and the collection of the images contained in the book, which may be printed, viewed or displayed during the course at home or in the classroom may be downloaded from the website cncwebschool.com. Finally the book contains a list of technical terms and their translation from English into Italian and German.
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.  

Specifications

Publication date

November, 2013

Author

Lorenzo Rausa

Book format

Paperback

Genre

Technology & Engineering/Mechanical, House & Home/Power Tools

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.

Customer ratings & reviews

0 out of 5 stars
0 ratings|0 reviews
This item does not have any reviews yet
Current price is $27.76
Price when purchased online
  • Free shipping
  • Free Holiday returns until Jan 31
$27.76
Out of stock

How do you want your item?

How do you want your item?
Ships to
Arrives between Nov 24 - Nov 28
|
Sold and shipped by Alibris Books
4.584860298895387 out of 5 stars
4.6 stars out of 5, based on 15390 seller reviews(4.6)
Extended holiday returns
Free Holiday returns until Jan 31
Other sellers
$28.90
+Free shipping
Shipping, arrives by Fri, Nov 27 to Columbus, 43215
Sold and shipped by Walmart.com
Extended holiday returns
Free Holiday returns until Jan 31