9 Inch Ford Bolt-on Rear Disc Brake Kit
9 Inch Ford Bolt-on Rear Disc Brake Kit
Hero image 0 of 9 Inch Ford Bolt-on Rear Disc Brake Kit, 0 of 15

9 Inch Ford Bolt-on Rear Disc Brake Kit

(No ratings yet)

Key item features

  • Complete Rear Disc Brake Conversion: Designed for Ford 9-inch rear-ends, easily converting to modern disc brakes using ’78 and up GM metric components for improved stopping performance.
  • Dual Bolt Pattern Rotors: 11-1/4-inch vented iron rotors drilled for both 5x4.5" (for Ford/Mopar) and 5x4.75" (for GM/Chevy) bolt patterns to fit a wide range of wheel setups.
  • Includes GM Metric Calipers: Loaded 1978-up GM single-piston calipers with integrated E-brake brackets, pads, and mounting hardware for a complete installation.
  • Universal E-Brake Cable and Hoses: Kit includes a 96" cut-to-length emergency brake cable, stainless hoses, banjo bolts, and all required fittings for easy hookup.
  • Durable and Easy to Install: Bolt-on design fits small and big bearing Ford housings with up to 6-1/4" axle flange diameter; requires 15" or larger wheels.

Specs

Vehicle fitment type, SpecificAutomotive parts division, Direct ReplacementVehicle type, CarBrand, Speedway MotorsMaterial, Iron, Stainless SteelHas written warranty, No

About this item

Product details

Rotors- These 11-1/4" one-piece, vented iron disc brake rotors are for rear disc brake applications. Features dual bolt patterns for 5 x 4.5" (Ford/Mopar) and 5 x 4.75" (Chevy/GM) wheels.  Center Hole:  2.78" Backspace:  2.30" Maximum Axle Flange Diameter:  6-1/4" Thickness:  1" Thickness @ Center of Rotor:  0.236" Brackets- Allows you to bolt '78 an Up GM Metric disc brakes on Ford 9" rearend. Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles For Ford passenger car axles ONLY  Fits axle with maximum flange diameter of 6-1/4" O.D. For 15" and larger wheel applications ONLY Includes: 2 Caliper brackets 2 Adapter plates 2 Spacer plates 4 5/16" spacers 4 1/8" spacers Note:  This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts.  If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so.  Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2". Hardware- This hardware kit allows you to bolt '78-Up GM Metric disc brakes onto a Ford 9" rearend when used with our GM Metric Disc Brake to 9 Inch Ford Bracket Set. This complete set is made up of Grade 8 bolts, washers, and nylock nuts. Includes: (8) 3/8"-24 x 1-1/2" Grade 8 bolts. (8) 3/8"-24 x 2" Grade 8 bolts. (16) 3/8" flat washers. (16) 3/8" Grade 8 nylock nuts. Calipers- These 1978-up GM Metric calipers accept either GM or Lokar type emergency brake cables. The fluid inlets are tapped to accept 7/16-20 banjo fittings. Includes the bracket to attach the emergency brake cable, slider bolts, and brake pads. The bleeder hole is 10mm x 1.5. If speed bleeders are needed, use our part number 6173958. Mount bolt spacing is 5.45". Brake Hoses- These front brake hoses are designed for 1955-1974 GM front disc brake conversions using stock-style 1969-1988 GM single-piston calipers. For 7/16"-20 calipers. This hose comes with banjo bolts, but not crush washers. 1955-1974 GM. E-Brake Cable- Universal replacement e-brake cable for your parking brake setup. Comes with a heavy-duty cut-to-length cable, works with disc or drum brakes. Features: Universal e-brake cable kit. Includes all necessary hardware for install. Cut-to-length. 96" housing length. 108" total length.
  • Complete Rear Disc Brake Conversion: Designed for Ford 9-inch rear-ends, easily converting to modern disc brakes using ’78 and up GM metric components for improved stopping performance.
  • Dual Bolt Pattern Rotors: 11-1/4-inch vented iron rotors drilled for both 5x4.5" (for Ford/Mopar) and 5x4.75" (for GM/Chevy) bolt patterns to fit a wide range of wheel setups.
  • Includes GM Metric Calipers: Loaded 1978-up GM single-piston calipers with integrated E-brake brackets, pads, and mounting hardware for a complete installation.
  • Universal E-Brake Cable and Hoses: Kit includes a 96" cut-to-length emergency brake cable, stainless hoses, banjo bolts, and all required fittings for easy hookup.
  • Durable and Easy to Install: Bolt-on design fits small and big bearing Ford housings with up to 6-1/4" axle flange diameter; requires 15" or larger wheels.
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.  

Specifications

Vehicle fitment type

Specific

Automotive parts division

Direct Replacement

Vehicle type

Car

Brand

Speedway Motors

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.

Customer ratings & reviews

0 out of 5 stars
0 ratings|0 reviews
This item does not have any reviews yet
Current price is $578.99$578.99/count
Price when purchased online
  • Free shipping
  • Free Holiday returns until Jan 31

How do you want your item?

How do you want your item?
Ships to
Arrives between Nov 30 - Dec 3
|
Sold and shipped by Speedway Motors, INC
4.460199004975125 out of 5 stars
4.5 stars out of 5, based on 402 seller reviews(4.5)
Extended holiday returns
Free Holiday returns until Jan 31