StarLink Fire Commercial Fire Cellular Communicator, Sole Path

Take advantage of Verizon's cellular network for reliable security transmissions with the Napco StarLink Fire Commercial Fire, Sole Path, Connected by Verizon LTE. This cellular transmitter module enables your connected security system to utilize Verizon's cellular network for secure, encrypted transmissions between your security system, your smart device, a central monitoring station, and first responders. The Radio is compatible with any 12V security panels using Contact ID or 4/2 connections. The Radio Module can be installed and setup in four easy steps: First register your new StarLink radio module online at www.napcocomnet.com. Next mount the module up to 100 feet away from your alarm security panel and attach the antennas. Wire the radio module to the alarm panel and then test for power and signal connections. Specifications: Housing: Durable ABS plastic (red) includes three keyhole slots for mounting (easy alignment with triple gang boxes). Diagnostic LED Indicators: Green: Signal Strength; Amber: Busy/Activation; Red: Trouble. Electrical Ratings: Input Voltage: 11-15VDC; Input Current: 71mA with peak RF transmission current of 200mA. Ratings for IN 1 Burg/Fire Input: Input Voltage: 9-15VDC; Maximum Input Current: Up to 2mA. Ratings for IN 2 and IN 3: Maximum Loop Voltage: 15VDC; Maximum Loop Current: 1.2mA. End of Line Resistor (EOLR) Value: 10K. PGM Output (3) Ratings: Open Collector Outputs: 3V Max., active; 15V Max., inactive. PGM Sink Current: 50mA, Max. Environmental Ratings: Operating Environment: 0 to 49 degrees C (32-120 degrees F). Operating Humidity: Maximum 93% (non-condensing). Dimensions: 5-3/8"x 7-7/8"x 1-7/8" (HxWxD). Weight: 13.5 oz. Warranty: 3 years. Manufacturer Part #: SLE-LTEV-FIRE.