Foxwell NT301 OBD2 Scanner Check Engine Light Read Clear Error Code Reader OBDII Auto Diagnostic Scan Tools Freeze Frame O2 Sensor Monitor Live Data On-board Monitor Test

Foxwell NT301 OBD2 scanner supports all OBDII functions for most vehicles, It can quickly read and clear/erase DTC (engine fault codes). Access to emissions readiness status, on-screen DTC definitions, built-in DTC look up library, allow you accurately determine causes of the check engine light, turn off the MIL(Malfunction Indicator Lamp). The auto code reader has 2.8" TFT color screen and hot keys for I/M readiness test.

🏆Full 10 Engine System Functions:

✅Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

✅Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

✅Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

✅I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

✅Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

✅View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

✅O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

✅On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

✅Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

✅Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

🔥Enhanced OBD II functions:

LED Notifications: Red-Yellow-Green LEDs and build-in speaker indicate the readiness status for smog check. This engine diagnostic tool can also help catch intermittent problems or confirm repairs during a drive cycle.

Data Log: The NT301 auto code reader records PIDs for later use to help you diagnose intermittent driving performance problems which can not be determined by any other methods.

DTC Help: Press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.

VIN Retrival: Automatic VIN acquisition and deco-ding make it much easier to read manufacturer specific codes and enhanced mode 6 data.

Print Data: If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help.

🌟I/M One-Key Fast Check:

Quick state emissions readiness check and drive cycle verification.

red-yellow-green leds and build-in speaker indicate emissions monitor status,

they can also help catch intermittent problems or confirm repairs during a drive cycle.

🌐Support Languages:

Three multilingual package for options:

(1) English ,  Spanish,   French , German, Italian

(2) English , Portuguese , Hungarian, Dutch , Swedish

(3) English, русский, 

🚗Support Car List:

1. America Car List: (include Brazil)

Need standard obd2 , and release from 2001 years to now

Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep

2. Europe Car List:

Need standard obd2 , and release from 2004 years to now

Fit for Alfa Romeo ,Fit for SAAB  ,Fit for Acura  ,Fit for Opel, Fit for Audi ,Fit for Seat  ,Fit for Peugeot

Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu  ,Fit for Land Rover

Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar 

3. Asia Car List: (include Australia)

Japanese car  Need standard obd2 , and release from 2006 years to now

Fit for KIA ,Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai  ,Fit for Dacia  ,Fit for Lexus ,Fit for Mazda 

Fit for Nissan  ,Fit for Subaru ,Fit for Suzuki, Fit for Toyota

4. Chinese Car List

Chinese car Need standard obd2 , and release from 2011 years to now

Fit for BYD, Fit for Chery, Fit for Geely, Fit for Great Wall, Fit for Karry

⚠️NOTE:

for Ssangyong Actyon, Kyron, Rexton, from 2011-2017 years.

for Ssangyong Korando, from 2013-2017 years.

for Renualt cars from 2016-2018 years

Does not support for Renault / Dacia Logan , Clio.

Does not support for LADA, UAZ, VAZ

No Car OBD2 Scanner can work for all cars, If the device does not fit for your car, please try to test on another newly car.

👍Lifetime Free Update:

Stpe1: Download the update tool from foxwell official website, connect the NT301 to PC and login in the foxwell pro-gram , the device will be automatcially detected.

Stpe2: You can go to setting , select the language of your software package.

Step3: Click online update, it will download the software, then click on Offline update, you may install the patch.

📌Specification:

Display: 2.8"TFT color screen

Operating Temperature: 0 to 60 (32 to 140)

Storage Temperature: -20 to 70 (-4 to 158)

Power: 8 to 18 V provided via vehicle

Supported Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898

Weight: 0.6Kg

🎁Package List:

1 x FOXWELL NT301 Diagnostic Tool

1 x User Manual

1 x USB Cable