37 Inch Aluminum Swedged Rods, 3/8-24 Threads
37 Inch Aluminum Swedged Rods, 3/8-24 Threads
Hero image 0 of 37 Inch Aluminum Swedged Rods, 3/8-24 Threads, 0 of 6

37 Inch Aluminum Swedged Rods, 3/8-24 Threads

|40 ratings

Key item features

  • Made using 3/4" OD x .120" wall thickness round 6061-T6 aluminum to maximize strength while remaining as light as possible
  • 3/8"-24 internal threads with RH thread in one end and LH in the other allows for length adjustment by spinning the tube
  • Useful for shifter linkage, spoiler supports, splitter supports, etc. in full size cars
  • Also used for steering linkage and suspension components on smaller vehicles such as Karts, Quarter Midgets, or Mini-Sprints
  • Available in lengths from 4" to 38-1/2"

Specs

Hardware threaded rod type, Aluminum Swedged RodMaterial, 6061-T6 AluminumThread size, 0.375 inFinish, NaturalBrand, Speedway MotorsCompatibility, Shifter, Engine Accessory Bracket Adjuster, Tie Rod, Kart, Quarter Midget, Mini Sprint

About this item

Product details

Natural 6061-T6 aluminum tube for clutch and shifter linkage, and other chassis uses. Suitable for tie rod, engine accessory bracket adjusters, and more. Ends threaded 3/8-24 LH and RH threads for rod ends or clevises of your choice. Available in 65 lengths from 4-inches to 38-1/2-inches long, most in half-inch increments. Outside diameter of tube is .750-inch (3/4-inch) Thin wall construction with swedged ends offers lighter weight than comparable non-swedged tubes. Single rotation will adjust the overall length in or out by approximately 5/64-inch. Knurled surface to aid in rotating the tube to make required adjustments. Order by actual length measurement required for application. Swedged Tubing Provides Similar Strength with Less Weight Weight is the enemy of a race car. Any time you can save weight without reducing integrity or creating an unsafe situation you will benefit. Utilizing aluminum tubing for such things as control arms, Panhard bars, steering linkage, and more are all great ways to not only save weight but allow your suspension and steering to react faster to changes in the track surface, which ultimately keeps your race car’s tires in contact with the racing surface for precise throttle, braking, and steering control that can put you in the winner’s circle. One easy way to save weight is to replace heavy wall steel suspension and steering tubes with thin wall aluminum versions that utilize a swedged end. As aluminum is lighter than steel with similar strength characteristics it is the perfect upgrade to these suspension and steering pieces when sized properly for the application. Weight savings are further realized with the thinner wall dimensions of the aluminum tube versus a comparable steel tube of the same outside diameter. Swedging the ends of the aluminum tubing shrinks the outside diameter down, which thickens the wall of the tubing in the area where threads are created for the heim joint, bushing, or clevis end piece to be installed. This critical area is cold formed, which further strengthens the aluminum tube. Swedged aluminum tubes, on average, are 30 percent lighter than their steel counterparts while meeting the same strength requirements. Multiple Lengths to Fit Any Race Car Application We offer these super strong aluminum threaded tubes for your project in a bare finish. They are constructed from 6061-T6 aluminum with .120-inch wall thickness and available in 65 different lengths from 4-inches to 38-1/2-inches, with most in half-inch increments. These natural finish aluminum tubes are threaded to accept 3/8-24 rod ends, bushings, or clevises with left-hand and right-hand threads. This allows the adjusting sleeve to be mounted between two points of adjustment, such as your shifter and transmission, among other fitment applications. Rotating the threaded tube moves the threaded ends of your choice inward or outward for adjustment. For the 3/8-24 thread ends these aluminum sleeves utilize this equates to roughly 5/64-inch of adjustment for each full rotation of the hollow threaded tube. This allows for precise adjustment of your shifter, throttle linkage, engine accessory brackets, and other items these smaller 3/4-inch aluminum tubes are best used for. Great for Chassis and Suspension Builds for Karts and Quarter Midgets Wherever you wish to save weight by using an aluminum adjustable threaded tube in your race car, be it for a steering linkage, chassis support, or elsewhere, it is easy to figure out exactly what you need. Simply measure the center-to-center distance of your two adjustment or mounting points, subtract 2-1/2-inches for your rod ends, bushings, or clevises you choose and then order the closest length to that measurement. So, if your final measurement after subtracting the 2-1/2-inches for your ends is 18-inches, that is what you will order from the drop-down menu.
  • Made using 3/4" OD x .120" wall thickness round 6061-T6 aluminum to maximize strength while remaining as light as possible
  • 3/8"-24 internal threads with RH thread in one end and LH in the other allows for length adjustment by spinning the tube
  • Useful for shifter linkage, spoiler supports, splitter supports, etc. in full size cars
  • Also used for steering linkage and suspension components on smaller vehicles such as Karts, Quarter Midgets, or Mini-Sprints
  • Available in lengths from 4" to 38-1/2"
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.  

Specifications

Hardware threaded rod type

Aluminum Swedged Rod

Material

6061-T6 Aluminum

Thread size

0.375 in

Finish

Natural

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.

Warnings

Customer ratings & reviews

4.9 out of 5 stars
stars
40 ratings40 reviews
Includes global ratings and reviews
How item rating is calculated
Filtered and sorted results would be available on the new 'Customer ratings & reviews' page.
Sort by |

Showing 1-3 of 40 reviews

Mar 19, 2021
Reviewer name: Briansshop
5 out of 5 stars
5 out of 5 stars review

Nice,quality piece

Used for anti roll bar links

Review from speedwaymotors.com
Helpful?47JTC3PUMOMG267562192
Jan 14, 2021
Reviewer name: Pontiac Tom
5 out of 5 stars
5 out of 5 stars review

I would buy this again

Belt tensioner

Review from speedwaymotors.com
Helpful?47JTC3PUMOMG267562192
Aug 17, 2020
Reviewer name: David Wirth
5 out of 5 stars
5 out of 5 stars review

yes i would

micro radius rod

Review from speedwaymotors.com
Helpful?47JTC3PUMOMG267562192
Current price is $24.99
Price when purchased online
  • Free Holiday returns until Jan 31

How do you want your item?

How do you want your item?
Ships to
Arrives between Nov 24 - Dec 1
|
Shipping fee $13.99
Sold and shipped by Speedway Motors, INC
4.460199004975125 out of 5 stars
4.5 stars out of 5, based on 402 seller reviews(4.5)
Extended holiday returns
Free Holiday returns until Jan 31