ITT Jabsco Impeller 17937-0001P
ITT Jabsco Impeller 17937-0001P
Hero image 0 of ITT Jabsco Impeller 17937-0001P, 0 of 2
JABSCO

ITT Jabsco Impeller 17937-0001P

(No ratings yet)

Key item features

  • Impeller KitMaterial:NeopreneDrive Type:Spline DriveNumber of Blades:10Dimensions:
  • Diameter:2-9/16"
  • Shaft Width:⅝"
  • Shaft Diameter:2"Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
  • Box Dimensions: 3"H x 5"W x 8"L WT: 0.45 lbs
  • UPC: 671880570749

Specs

Boat accessory type, ImpellerBrand, JABSCOFeatures, boat-plumbing-itemsMaterial, metalSize, One SizeColor, Multicolor

About this item

Product details

JABSCO® DIRECT REPLACEMENT IMPELLERS FOR OEM BRAND PRODUCTS Interchangeable With: Oberdorfer # 7441 Perkins #0460024 Perkins # 24880031 Volvo #801277 Volvo #825941 Volvo #875593 Yanmar # 127610-4220 Impeller Material: Neoprene MFG# 17937-0001P 179370001P UPC# 671880570749
  • Impeller KitMaterial:NeopreneDrive Type:Spline DriveNumber of Blades:10Dimensions:
  • Diameter:2-9/16"
  • Shaft Width:⅝"
  • Shaft Diameter:2"Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
  • Box Dimensions: 3"H x 5"W x 8"L WT: 0.45 lbs
  • UPC: 671880570749
info:
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.  

Specifications

Boat accessory type

Impeller

Brand

JABSCO

Features

boat-plumbing-items

Material

metal

Warranty

Warranty information

We offer a 30 day money back guarantee on the performance of the item, unless otherwise stated in the item listing.

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.

Warnings

Customer ratings & reviews

0 out of 5 stars
0 ratings|0 reviews
This item does not have any reviews yet
Current price is $45.24
Price when purchased online
  • Free shipping
  • Free Holiday returns until Jan 31

How do you want your item?

How do you want your item?
Ships to
Arrives by Mon, Nov 2
|
Sold and shipped by Boating Store
4.667353951890035 out of 5 stars
4.7 stars out of 5, based on 1455 seller reviews(4.7)
Extended holiday returns
Free Holiday returns until Jan 31

More seller options (10)

Starting from $52.48