Imountek Underground Electric Fence for Dogs, 1.2 Acre Adjustable Circular Barrier Electric Dog Fence Rechargeable Dog Fence Collar 984ft Wire with 2 Collars

How It Works:
1) Wall-mounted transmitter: Transmitter is the central controller to whole electronic system. Make sure the wire is set to a loop.
2) The receiver collar: Receiver (collar) will make a warning beep firstly and then continuous stimulation if your dog attempts to approach wire boundary.
3) How to install the system
*Design your containment area and calculate the amount of wire needed.
*Install the wall transmitter.
*Lay out the perimeter wire.
*Connect the perimeter wire to the wall transmitter.
*Verify transmitter is functioning without problem.
*Set up the receiver and then, test the containment system and adjust the field width.
*Install the boundary wire and training flags.
*Fit collars to your dogs and train your dogs.

Note:
*Only use it for dog, not any other animals.
*Let your dog adapt to the collar before you start training. You should allow your dog to accept the collar as a part of her life.
*When the collar in your dog, do not set the program.
*Keep away from children can touch the place.
*Please read all instructions before using this product.
*The receiver can detect the signal emitted around 1m away from the boundary when the boundary range is adjusted to minimum. The receiver can detect the signal emitted around 2m away from the boundary when the boundary range is adjusted to maximum. If your dog is small, it’s recommended to apply small field width. If your dog is large, it’s recommended to apply bigger field width.

Specification
Brand: iMounTEK
Product Type: Electric Dog Fencing System
Materials: ABS
US Plug Of Remote: 100-240V
Collar Battery Type: 4LR44 6V
Runtime Per Battery: 10Days
Adjustable Control Range: Up To 5000 Square Meters/53189Square FT/1.2Acre
Pet Collar Fits Dogs 4lbs+ with Neck Sizes From 7.5in To 17.92in
Bury Wire Cable Length: 300m/984FT
Suggested Wire Bury Depth: More Than 1in Underground
Per Flag Size: 3.34x7.68x0.2in
Charging Cable Length: 43.3in
Per Collar Strap Length: 17.92in
Transmitter Size: 5.63x3.55x1.97in
Transmitter Weight: 0.26lbs
Per Collar Receiver Size: 2.56x1.38x1.19in
Per Collar Receiver w Strap Weight: 0.12lbs

Package Contents
1x Indoor Wall-mounted Transmitter
2x Adjustable Receiver Collars w/Neck Straps
1x Power Adapter w/ Charging Cable
2x 4LR44 6V Batteries (Installed In Receivers)
1Coil x Boundary Wire
20 x Training Flags
2x Test Bulbs
2Pairs x Extra Metal Contact Points
1Bag x Screw
1x User Manual