1.5 HP Cast Iron Sprinkler/Irrigation Pump, 115/230 Volt, 66 GPM 3450 RPM Shallow Well Jet Water Pum

Highlights: 1.98 ft Max. Head Lift: Our cast iron sprinkler pump has a 1.5 HP / 1118.5W all-copper motor that boasts incredible suction power. It effortlessly draws water from lakes and shallow wells, fearlessly conquering elevation drops of up to 25 ft / 7.6 m. With a remarkable flow rate of 66GPM, it can pump water to a towering 98 ft / 29.9 m, making garden irrigation a breeze. 2.Automatic Pressure Switch: Say goodbye to manual controls! When you turn your faucet on and off, our shallow well jet pump responds automatically. It activates when water pressure falls within the 20 - 40 PSI range and automatically shuts down when beyond this range, protecting against potential pipeline blockages and damage due to low water pressure. For precise pressure monitoring, consider adding a pressure gauge to ensure your sprinkler pump operates optimally. 3.Dual Voltage Motor: Our sprinkler pump supports dual voltage operation, factory-set at 230 V but easily switchable to 115 V, accommodating various power sources and ensuring that your pump's voltage always aligns with your power supply. By avoiding the issues associated with voltage mismatch, our pump significantly reduces energy consumption and helps lower harmful emissions. 4.User-Friendly Operation: With the right voltage in place, simply plug it in, attach the 1-1/4'' water pipe to the inlet and 1'' water pipe to the outlet, and you're ready to go. Before use, ensure that you've filled the water inlet on the pump head with water, then simply tighten the bolts securely. Now, you're ready to start the well jet pump. If infrequently used, remember to drain the water. 5.Built to Last: Our irrigation pump for sprinkler system is constructed from rugged cast iron, wear-resistant and corrosion-resistant. It can confidently withstand the outdoor elements, whether in your courtyard or on your farm. It features a rear cooling vent for efficient heat dissipation and an integrated automatic thermal overload protector, ensuring consistent and reliable service for many years Details: 1.5 HP Sprinkler Irrigator Pump This cast iron sprinkler pump features a formidable 1.5 HP / 1118.5 W all-copper motor, perfect for drawing water from depths as low as 25 ft / 7.6 m and delivering it to towering heights of up to 98 ft / 29.9 m. It's specifically designed for lake, pond, and shallow well irrigation. Our shallow well jet pump has automatic water flow detection and precise start/stop control. It automatically starts when water is needed and goes into standby mode when water usage stops. perating Pressure: 20 - 40 PSI. It avoids pipeline blockages and potential damage. This sprinkler pump supports dual voltage usage, factory-set at 230 V but easily switchable to 115 V, ensuring stable operation tailored to your needs. Before use, ensure that you've filled the water inlet on the pump head with water, then simply tighten the bolts securely. Now, you're ready to start the well jet pump. Crafted from cast iron, our shallow well pump can withstand harsh outdoor conditions without fear of erosion. Its rear cooling vent dissipates heat instantly, with an integrated automatic thermal overload protector to ensure years of reliable service.