X-Pro Bali 50 Gas Moped 4‑Stroke 49.5cc Moped Scooter with Electric & Kick Start, CVT Transmission, 10" DOT Wheels, LED Headlight, Under‑Seat Storage (Orange)

X-PRO Bali 50 — 49.5cc Gas Moped Scooter, 330 lb Capacity, Triple EPA/CARB/DOT Certified

The X-PRO Bali 50 is a 49.5cc gas-powered moped scooter with EPA emission certification, CARB approval, and DOT certification — covering all 50 U.S. states including California. CVT fully automatic transmission means no clutch, no gear shifting. Designed for adult, first-time riders, and larger adults who need a properly-rated, triple-certified moped.

What Sets It Apart at This Price:

• 330 lb maximum load capacity — 47% higher than the 225 lb limit on most competing 50cc mopeds
• Triple-certified: EPA + CARB + DOT — in all 50 U.S. states including California
• Front hydraulic disc brake for superior stopping vs. drum-brake competitors
• Large LED headlight + factory turn signals — standard, not optional
• Xinba GY6 49.5cc 4-stroke engine — most widely serviced 50cc platform in the U.S.
• 10-inch aluminum alloy wheels
• 30+ mph top speed, 100+ mpg estimated fuel economy, 5L (1.32 gal) tank
• 
  
  ASSEMBLY: Arrives 85% pre-assembled. Assembly time approximately 45–60 minutes. Professional mechanic assembly recommended. Tool kit NOT included — basic hand tools (wrench, screwdriver) must be supplied by the buyer. Change engine oil before first ride — factory fill is break-in oil only. Assembly video: youtu.be/S_E0U3Ftnqw
  
  Warranty: 1-year frame, 90-day parts, 90-day battery. OEM parts stocked in U.S. warehouses (CA & TX). X-PRO is a licensed U.S. powersports dealer with 20+ years of experience.
  
  TECHNICAL SPECIFICATIONS
  
  Power
  Engine Brand: Xinba GY6
  Engine Displacement: 49.5cc
  Cylinders: Single
  Cooling System: Air-Cooled
  Compression Ratio: 10.5:1
  Bore x Stroke: 39 × 41.5 mm
  Max Power: 2.1 kW / 7500 rpm
  Max Torque: 3.1 N·m / 6500 rpm
  Transmission: CVT (Belt Drive)
  Clutch Type: Centrifugal Clutch
  Start System: Electric Start (Primary) + Kick Start (Backup)
  Final Drive: Belt
  Ignition Type: CDI
  Fuel System: Carburetor
  Carburetor: PD18J
  Battery (Starter): 12V / 7Ah
  
  Fuel & Performance
  Top Speed: 30+ mph (depending on rider weight and conditions)
  Fuel Tank Capacity: 5L (approx. 1.32 gal)
  Fuel Type: Gasoline (87 Octane)
  Estimated Fuel Economy: 100+ mpg (approx. 2.3L / 100 km)
  
  Mechanical
  Frame Type: Steel Frame
  Brake – Front: Disc Brake
  Brake – Rear: Drum Brake
  Suspension – Front: Telescopic Fork
  Suspension – Rear: Single Shock
  Wheel Material: Aluminum Alloy
  Tire Type: Tubeless
  Front Tire Size: 3.50-10
  Rear Tire Size: 3.50-10
  Seat Material: Synthetic Leather
  
  Size & Fit
  Overall Length: 71.6"
  Overall Width: 26"
  Overall Height: 42"
  Seat Height: 30"
  Ground Clearance: 3.15"
  Wheelbase: 51.18"
  Package Dimensions (L×W×H): 64 × 23 × 32”
  Net Weight: 168 lbs
  Gross Weight: 212 lbs
  Max Load Capacity: 330 lbs
  
  Certification
  EPA Certified: Yes
  DOT Approved: Yes
  CARB Certified: Yes
  
  SAFETY / CONTROL
  Headlight: Yes – LED
  Tail Light: Yes
  Turn Signals: Yes
  Horn: Yes
  Engine Kill Switch: Yes
  Hand Brake: Yes
  Speedometer: Yes
  
  WHY BUY FROM X-PRO
  Licensed U.S. powersports dealer with 20+ years of experience. Two company-owned warehouses in CA and TX. Full OEM replacement parts stocked and ready to ship. Manufacturer warranty handled by a U.S.-based team. Real dealer backing — not a temporary marketplace seller or dropshipper.
  
  Assembly & Setup
  What's in the Box
  Vehicle body (85% pre-assembled), front wheel (1), front panel (1), handlebar clamp bolts (1 set), rear rack (1), rearview mirrors (2), battery (1), battery cover (1), owner’s manual (1).
  NOT included — tool kit (basic hand tools required — buyer must supply), helmet (required, sold separately), rear trunk (sold separately; rear rack IS included).
  
  What to Assemble
  Front wheel (mount to front fork, align brake disc, tighten axle nut — intermediate difficulty) · Front panel (align and secure — basic) · Handlebar clamp bolts (align, tighten — basic) · Rear rack (secure with bolts — basic) · Rearview mirrors ×2 (screw in, adjust angle — basic) · Battery (Red [+] first, then Black [−] — basic) · Battery cover (basic)
  
  Assembly Time
  Approximately 45–60 minutes for someone with basic mechanical skills. Professional mechanic assembly recommended. Two-person assembly advisable for front wheel installation. Assembly video: youtu.be/S_E0U3Ftnqw
  
  BEFORE YOU BUY
  
  STAY CONNECTED
  After your order ships, the seller will contact you by phone and email to coordinate delivery. Answer calls from unfamiliar numbers and check your email daily including spam until delivery is complete.
  LTL FREIGHT DELIVERY
  Carrier will schedule delivery appointment. Large trucks need access. Inspect before signing. Note damage on receipt and contact the seller immediately with photos.
  ASSEMBLY — Tool Kit NOT Included: A tool kit is NOT included with this model
  Buyers must supply basic hand tools (wrench, screwdriver). Professional mechanic assembly is highly recommended. Apply thread-locker (Loctite) to all bolts before first ride — vibration loosens factory settings.
  ENGINE CARE
  Change oil before first ride — factory fill causes engine damage if not replaced. Use 87+ octane fuel (ethanol-free preferred, E10 max). Drain fuel for storage over 30 days.
  PERFORMANCE
  Speed and fuel economy figures are measured under optimal conditions. Real-world results vary with rider weight, terrain, and fuel quality.
  STORAGE
  Drain fuel tank for storage over 30 days. Disconnect battery for storage over 60 days. Store indoors, dry. Inspect bolts and brakes before returning to use.
  SAFETY
  Age 18+. Helmet and gear required (not included). Maximum load 330 lbs — do not exceed. EPA + CARB + DOT certified — in all 50 U.S. states including California. Check local DMV for 50cc moped licensing and registration requirements.
  BREAK-IN PERIOD
  First 3–5 hours: avoid full throttle, use lower throttle settings. Re-tighten all bolts after break-in to extend service life.