Hero image 0 of Epelay PLA Plus 3D Printer Filament, 1.75mm, 4 x 1kg Spools, Black & White, Compatible with Most FDM Printers, 0 of 8

Best seller

Visit the Epelay Store

Epelay PLA Plus 3D Printer Filament, 1.75mm, 4 x 1kg Spools, Black & White, Compatible with Most FDM Printers

|5 ratings

Actual ColorBlack and White

Black, $44.09, was $48.99

Black and White, $49.99

Black, Grey, Blue and Orange, $49.99

Black, Grey, Red and Yellow, $49.99

Black, White, Grey and Blue, $49.99

Black, White, Red & Green, $49.99

Black, White, Red and Blue, $44.99, was $49.99

Blue, White, Red & Green, $49.99

Key item features

‌‌‌‌‌‌‌‌‌‌‌Enhanced Toughness: Improved over standard PLA for stronger, less brittle prints with better impact resistance.
‌‌‌‌‌‌‌‌‌Wide Temperature Range: Nozzle 200–230 °C; bed 55–65 °C for stable printing and strong layer adhesion.
‌‌‌‌‌‌‌‌High-Speed Compatible: Supports 50–300 mm/s for both standard and high-speed 3D printing.
‌‌‌‌‌‌‌‌‌Vacuum-Sealed Packaging: Helps reduce moisture absorption and maintain consistent print quality.
‌‌‌‌‌‌‌‌‌Optimized Performance: Dry at 50 °C for 6–8 hours before use for best results.
‌‌‌‌‌‌‌‌Color: Black and White.
‌‌‌‌‌‌‌‌Quantity: 4 spools per pack,1kg per spool.

Specs

Filament diameter, 1.75 mm.Material, PLABrand, EpelayColor, BlackCompatibility, Most FDM 3D PrintersFilament materials supported, PLA

About this item

Product details

Epelay PLA+ 3D Printer Filament is designed for strong and reliable 3D printing. It offers higher toughness and strength than standard PLA. Suitable for both functional and decorative parts.

Compatible with most 1.75mm FDM 3D printers. The filament has a diameter tolerance of ±0.02mm for stable and consistent feeding.

It provides smooth extrusion, low shrinkage, and minimal warping. This helps improve print quality and reduce failures.

The filament is neatly wound to reduce tangles during printing. It supports steady and uninterrupted feeding.

Each spool is dried and vacuum-sealed to reduce moisture. This helps prevent bubbles, clogging, and printing issues.

Epelay PLA+ delivers consistent performance and good bed adhesion for clean and stable prints.

‌‌‌‌‌‌‌‌‌‌‌Enhanced Toughness: Improved over standard PLA for stronger, less brittle prints with better impact resistance.
‌‌‌‌‌‌‌‌‌Wide Temperature Range: Nozzle 200–230 °C; bed 55–65 °C for stable printing and strong layer adhesion.
‌‌‌‌‌‌‌‌High-Speed Compatible: Supports 50–300 mm/s for both standard and high-speed 3D printing.
‌‌‌‌‌‌‌‌‌Vacuum-Sealed Packaging: Helps reduce moisture absorption and maintain consistent print quality.
‌‌‌‌‌‌‌‌‌Optimized Performance: Dry at 50 °C for 6–8 hours before use for best results.
‌‌‌‌‌‌‌‌Color: Black and White.
‌‌‌‌‌‌‌‌Quantity: 4 spools per pack,1kg per spool.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Filament diameter

1.75 mm.

Material

PLA

Brand

Epelay

Color

Black

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.