E6000 is formulated to meet high performance industrial requirements. The self-leveling formula forms a powerful bond with most any material and will remain flexible once cured. E6000 Industrial will handle just about any project DIYers or PROs throw at it!
WARNING: This product can expose you to chemicals including toluene which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
INSTRUCTIONS:
INSTRUCTIONS
Follow these step-by-step directions when using E6000: Read directions and test small area before use.
- Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
- TUBE: Puncture inner seal using pointer cap (if tube has a foil seal). CARTRIDGE: Trim end of nozzle. Puncture inner seal. Ideal application temperature range is 50 to 90 °F (10 to 32 °C). However, fully cured adhesive can withstand temperatures from -40 to 180 °F (-40 to 82 °C) intermittently.
- Apply directly to surfaces to be bonded or repaired.
- Allow 24 hours for curing–Maximum bond strength may not be reached for up to 72 hours.
- TUBE: For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. CARTRIDGE: For prolonged storage after opening, cover or plug the opening of the nozzle.
- Clean uncured adhesive with acetone or citrus-based solvents.
Product is paintable and immediately resistant to precipitation upon application.
Note: May damage finished surfaces. Avoid such contact until completely dry. Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam or paper products.Data Sheets:
DATA SHEETS
SAFETY DATA SHEET SDS SHEET REQUESTS: To request an SDS, please use the below link and include the following information
- Product name and description.
- Product Sales Part Number or UPC (if available).
- Product color.
- Country of usage.
- Language desired.
SDS Request Email Link:
TECHNICAL DATA SHEET E6 Craft TDS US CAN MEX ME AU NZ_REV 6 (English)
E6000 Industrial Clr_Blk US CAN MEX TDS – REV 3 (English)
WARNING: 