Seville Classics UltraHD Solid Steel Lockable Wall Cabinet Organizer, w/ Adjustable Shelf, Graphite, 24" W x 12" D x 24" H

I would recommend these cabinets to anyone that wanted great storage, hanging on the wall or setting up on a table, They are in my laundry room and hold all my washing detergent and Downy or whatever products you use ! Or in a tool room, durable and hold up well ! I love them .

The panels that form this cabinet are packed extremely well. No damage was noted even though the package was shipped to me. One thing on assembly, even though the top and bottom panels are interchangeable, the product logo plate is on just one. If you'd prefer the printing on that plate be right-side up, that panel should be the top panel. The door can be hinged on either side as both side panels will accept the door hinge screws. The assembled cabinet is very sturdy. Part of its sturdiness is likely due to the fact that it is designed to be assembled with screws and, thus, the panels must be fairly rigid from the get go. The screws/holes lined up perfectly - No adjustment, persuasion, line-up punches, etc. were needed. It just fit. All of the screw-receiving holes are tapped (threaded) from the factory so you simply line up the panel holes and, well, start screwing. There are no nuts to lose, drop or fiddle with. Just be sure to use the correct screws at the various locations. Seville was thoughtful enough to include a magnetic Phillips screwdriver to make it easier to get the screws started. One other tip, if you can, assemble the cabinet on a large table and, when possible, orient the panels so that the screws are vertical. (Threads down, not up!) Doing so makes it even easier to get them in place because you aren't working against gravity. If you wait until all of the panels are together before tightening the screws fully, you can square the cabinet up just before cinching everything down. Sam's had the best price, best delivery and the experience made me want to buy more when needed. Seville delivered a quality product. I added 2 plywood shelves and painted them to match. I used 1/2-inch plywood for the shelves and some 10-inch long, 2 x 6 blocks as end supports. The extra shelves sit on the bottom of the cabinet and on the factory shelf which I positioned midways in the cabinet. You can buy additional shelves from the manufacturer but the shipping interval and cost persuaded me to roll my own. Too bad they aren't offered with the cabinet because buying them separately adds almost 50% to the overall cost.