Wall Mount Wood Organizer and Lumber Storage Metal Rack with 3-Level - Indoor & Outdoor Use, 4 Pack

Installation Steps

Step 1
Mark out the holes at your desired height and space between on the wall, make sure two mounting bars keep in same level.

Step 2
Drill holes on the marked locations to fit in mounting bars with six mounting screws.

Step 3
Install the mounting bar onto wood stud firmly with the provided screws, repeat to fix another bar. If installation made on a concrete wall or brick wall, suitable anchor (not included) needs to be used, and make it flush with wall.

Step 4
Assemble the supporting bar with provided fasteners (plastic spacer sticker on both sides is used to offset the extra gap between), repeat to complete all supporting bars assembly.
 

 
Note
Ensure your mounting location is capable of withstanding the additional load, and make sure the mounting bar is in correct facing and up-down orientation before installation.

Package Included：

4 x Mounting bar 30x30mm
12 x Supporingbar 30x30mn
12 x Mountigscrew M8x60mm
12 x Crospanheadbolt M6x45mm
24 x Plasticspacer ticker M6
12 x Flat washer M6
12 x lock nut