Solid Bamboo Recliner Table with Drawer Mahogany

Purchased two of these to accompany our recliners. Overall they look good, but there are some areas where the finish is a bit splotchy and there are scratches from the pieces jostling in the box during shipping. Most of those are on inside surfaces, and so they're not noticeable. One leg had a cut in the bottom, like someone got a bit wild with the saw - again, once it's in place it's not noticeable and didn't seem to degrade the stability of the table. Finally, the directions are woefully lackluster. I've built dozens of furniture items like this, from simple tables to complex CD racks for a music retailer - I know my way around cam lock screws and build it yourself furniture. Several of the pieces were marked with the wrong part letter/number (for example, one set had two legs marked "6" and two marked "7" - the other had all of them marked "7" which is correct, but then the instructions don't even reference either number). A couple of steps in the instructions lack part letter/number references - the steps were logical enough, but for the less experienced, this could cause some serious frustration. Between the two sets, one came with bright silver screws and the other came with more traditional looking wood screws (though they were kind of oddly weathered). On neither table were pilot holes drilled for the bottom shelf. Took me about an hour each to build, which I expected, despite the incorrect part markings and lack of part denotations in the instructions.