Getting the right size helps your setup look balanced and stay stable.

• Measure your TV’s actual width: The diagonal size isn’t the width. Check your TV specs for the width and the spacing of its feet.
• Match or exceed the width: A stand as wide or wider than the TV can provide a cleaner look and more stability.
• Check weight capacity: Compare the stand’s max load with your TV’s weight (plus accessories).
• Mind foot placement: Make sure both TV feet sit fully on the top surface.
• Plan for accessories: Allow space for a soundbar, consoles, or décor.

On this page, you can filter by “TV size” (e.g., up to 55", 65", 75") and features like storage, LED lighting, or floating designs, then choose delivery or pickup at checkout.

A good floating TV stand can work for gaming gear when matched to your wall and setup.

• Confirm wall type and studs: Mounting into wood studs is common; ratings may differ for other materials. Follow the manufacturer’s instructions.
• Check weight rating: Add up your devices and compare to the stand’s max load.
• Measure depth and airflow: Make sure shelves are deep enough and leave space around consoles for ventilation.
• Cable management: Look for rear cutouts and channels so cords route neatly.
• Power access: Some units include outlets; avoid overloading and use surge protection as needed.

Installation can vary by model. If you’re unsure about anchors or stud spacing, consulting a professional installer may help.

Tidier cables can make your entertainment center look clean and feel easier to use.

• Choose built-in management: Many media consoles include rear cutouts and panels that guide wires.
• Use raceways: Adhesive cord covers can blend with your wall and route cables from TV to stand.
• Tidy and label: Velcro ties or reusable wraps keep bundles neat; label each plug for quick swaps.
• Power placement: A low-profile surge protector inside the cabinet can reduce visible cords while providing protection.
• Safety note: Avoid running standard power cords inside walls. If you want an in-wall look, consider in-wall–rated power kits and follow all instructions, or consult a professional.

Many stands here offer cable cutouts or integrated power to simplify setup.

Simple steps can reduce tip and snag risks in busy living rooms.

• Anchor furniture: Secure the TV stand to studs with the included anti-tip hardware when provided.
• Stabilize the TV: Use an anti-tip strap or a proper wall mount per the TV and mount instructions.
• Place heavy items low: Keep game consoles and receivers on lower shelves to lower the center of gravity.
• Control doors and cords: Add soft-close latches if compatible and route cables through back panels or raceways.
• Maintain clearances: If your unit supports inserts or lighting, follow spacing and ventilation guidance.

Hardware and installation needs can vary by model. Reviewing the manual and, if needed, seeking professional help can add peace of mind.

A little planning can make under‑TV storage work harder and look cleaner.

• Set zones: Dedicate shelves for consoles and routers; keep a drawer or bin for remotes and controllers.
• Measure your gear: Check device width, depth, and ventilation needs before assigning shelves.
• Use dividers and bins: Drawer inserts, baskets, or labeled containers reduce clutter and tangles.
• Balance open vs. closed: Hide extras behind doors; use open shelves for devices that need airflow or frequent access.
• Protect surfaces: Add felt pads and cable grommets to reduce scratches and snags.

Filters on this page can help you find consoles with drawers, cabinets, or bookshelves to fit your plan, with delivery and pickup options available at checkout.