Drywall alone typically isn’t designed to carry a TV’s weight. For most setups, securing the mount into wall studs provides stronger support.

• Locate studs with a finder and use the hardware specified by the mount manufacturer.
• If you can’t hit studs, consider studless drywall TV hangers only when your TV’s size and weight fit the product’s rating and your wall type. Results can vary with heavier or larger screens.
• Avoid damaged drywall and check for hidden utilities before drilling.
• Distribute load across multiple fasteners when the mount allows.
• Have a second person assist, level the mount, and follow all instructions.
• If you’re unsure, a professional installation may be helpful for safety.

A few common missteps can lead to poor positioning or damage.

• Skipping the TV’s weight and VESA compatibility when choosing a mount.
• Missing studs or using the wrong anchors for your wall type.
• Mounting too high or low, causing neck strain and glare.
• Overtightening screws into the TV’s mounting holes, which can strip threads.
• Not planning cable routing or power access before drilling.
• Failing to verify clearance for tilt/swivel near shelves or corners.
• Working solo on larger screens, increasing the risk of drops or misalignment.

Taking time to measure, level, and follow the manufacturer’s instructions can help create a more secure, comfortable setup.

VESA describes the horizontal and vertical distance (in millimeters) between the mounting holes on the back of your TV, such as 200×200 or 400×400. It helps match your TV to a compatible mount.

1. Check your TV’s manual or look for four threaded holes on the back panel.
2. Measure center-to-center spacing in millimeters, left-to-right and top-to-bottom.
3. Choose a mount that lists your pattern within its supported range and meets the TV’s weight and size guidelines.

Because TVs vary, always confirm both VESA and weight capacity on the mount’s product page. This can help reduce fit issues and simplify installation.

Both can work well; it depends on your space, style, and lease.

• Wall mounting: Saves floor space, creates a clean look, and can reduce glare with tilt/swivel mounts. It often requires drilling and careful planning for studs and cables.
• TV stand: No drilling, easier to move, and provides shelf space for devices. It takes floor space and may benefit from an anti-tip strap for stability.

Consider room layout, seating height, and whether you can drill into walls. You’ll find a range of wall mounts and freestanding stands at Walmart, so you can choose the option that best fits your home and comfort level.

If you need a lease‑friendly setup, you have a few options.

• Freestanding TV stands: Place the TV on furniture or a floor stand that attaches to the TV’s VESA holes—no wall holes required.
• Studless drywall hangers: Some hangers are designed to distribute weight across drywall without anchors or studs. Only use them when your TV’s size and weight fit the product’s rating and your wall type.
• Check policies: Review your lease and get approval if needed.

Always follow the product instructions, keep within the specified load limits, and consider a helper for lifting. Removal and light patching may still be necessary, depending on the solution.