If you’re out of the official formula, you can use a compatible, machine-safe floor cleaner that’s designed for hard floors.

• Look for a multi-surface, low-foam, pH‑neutral solution labeled for use in wet/dry vacuums or floor washers.
• Follow the dilution instructions on the bottle to avoid residue and excess suds.
• Avoid vinegar, bleach, ammonia, essential oils, waxes, or solvent-based products, which can cause streaking, odors, or buildup.
• Spot-test in a discreet area and monitor for haze or slippery finish.

Some steam-focused models may specify water only—check your manual for model-specific guidance. Performance can vary by flooring and water hardness, so if you try a new formula, run a quick water-only rinse afterward.

Not every cleaner is suitable for a floor washer or wet/dry vacuum. The wrong formula can create heavy suds, streaks, or buildup inside the machine.

• Choose solutions specifically labeled for machine use on sealed hard floors (multi-surface, low-foam, pH-neutral).
• Skip dish soap, laundry detergent, furniture polish, oil-based additives, or solvent-heavy products.
• Stay within the tank fill lines and follow dilution directions on the cleaner’s label.
• After your first use with a new formula, do a water-only pass to help reduce residue.

Always check your device manual for any model-specific restrictions. Results can vary with floor type and soil level, so adjust usage as needed for the best experience.

You can try a DIY mix, but it’s generally safer to use a machine-approved cleaner. Homemade recipes can foam too much or leave residue that affects performance.

1. For light refreshes, plain water can help pick up dust and surface dirt.
2. If you still prefer DIY, only use a very mild, non-foaming, pH-neutral cleaner intended for hard floors, and dilute lightly.
3. Never mix chemicals, and avoid strong acids/alkalis, bleach, ammonia, or essential oils.
4. Test on a small hidden spot, watch for suds, and stop if streaking or haze appears.

Rinse tanks and run a brief water-only cycle after experimenting. Conditions vary by flooring and tap water, so proceed gradually and follow your device manual.

You can shop compatible multi-surface floor-cleaning solutions on Walmart.com, in the Walmart app, and at select stores.

1. Search for “multi-surface floor cleaning solution” and use filters for scent, size, or concentration.
2. Open the product page and check the description for machine compatibility and hard-floor suitability.
3. Scan ratings and Q&A for real-world tips from other customers.
4. Choose pickup or delivery based on what’s available in your area.

Stock varies by location, so sign in to see local availability. Look for terms like “low-foam,” “hard floors,” and “for use in floor washers” to help identify the right fit for your device.

Many multi-surface formulas are designed for sealed hard floors, including sealed hardwood, laminate, vinyl, and ceramic or porcelain tile.

• Check the label for “safe on sealed hard floors” and “machine use.”
• Avoid using on unsealed wood or specialty natural stone that may require a specific pH or care routine.
• If using a concentrate, start with a light dilution and avoid over-wetting gaps and joints.
• Test in a low-visibility area first to confirm no discoloration or streaking.
• Keep brushes, filters, and tanks clean to minimize haze and marks.

Floor finishes and water hardness differ, so you may need to adjust dilution, passes, or drying time to get the best results for your home.