“Stereo speakers” play two channels—left and right—to create a wider soundstage and a sense of space. Instead of all audio coming from one point (mono), different sounds are sent to each channel so you can perceive direction and depth.

• 2.0 stereo: two speakers, no subwoofer.
• 2.1 stereo: two speakers plus a subwoofer for low bass.
• Use cases: desktops (nearfield listening), TVs, turntables, and small living rooms.
• Connections vary by model: Bluetooth, 3.5mm aux, RCA, optical, or USB.

Placement and good source material can make a big difference. Even small speakers can sound more immersive when set up correctly.

The “best” choice depends on how and where you’ll use them. A few factors can help you narrow it down on Walmart.com:

• Powered vs. passive: Powered speakers include an amp (simple setup). Passive require an external receiver/amplifier.
• Room size & placement: Nearfield for a desk, bookshelf for small rooms, floorstanding for larger spaces.
• Inputs you need: Bluetooth, 3.5mm, RCA, optical, or USB for your devices.
• Power & specs: Look at RMS wattage and driver size for your volume and bass needs.
• Expandability: A subwoofer output and tone controls can help tailor sound.

Filters and customer reviews can guide you, and results vary based on your room and listening preferences.

The 38% rule is a common starting point for room setup: place your main listening position about 38% of the room’s length away from the front wall. It’s not a guarantee, but it can help reduce strong bass peaks and dips.

1. Measure the room length and mark 38% from the front wall.
2. Position speakers forming an equilateral triangle with your seat.
3. Start with equal distance from side walls; toe-in slightly toward your ears.
4. Make small adjustments for balance and clarity—every room behaves differently.

Keep cables tidy and out of walkways, and avoid blocking vents or power outlets while experimenting with placement.

Setup varies by speaker type:

• Powered speakers (3.5mm): Plug the aux cable into your PC’s headphone jack and connect power (USB or AC). Select the correct output in audio settings.
• Bluetooth speakers: Put the speaker in pairing mode, connect in your computer’s Bluetooth settings, and set it as the output device.
• USB speakers: Some act as a USB audio device. Plug in, then choose them in sound settings.
• Passive speakers: You’ll need an external amplifier/receiver; connect your PC to the amp, then the amp to the speakers.

Start with low volume, keep cables secure, and update drivers if you experience dropouts.

In many setups, yes. The approach depends on your gear:

• With a sub out: Connect a powered subwoofer to the sub/LFE output from your speakers or amplifier.
• No sub out: Use a powered subwoofer with speaker-level (high-level) inputs to tap the signal from your amp’s speaker terminals.
• Tune the blend: Set the crossover so bass transitions smoothly (often near 80 Hz, but adjust by ear).
• Placement & phase: Try near a wall or corner and test phase settings for tighter bass.

Check manuals for connection diagrams, and make small changes while listening to find what suits your room.