Start with a quick measure of your table, then choose the drop (overhang) you like.

• Rectangle/Oval: Add 12–20 inches to both length and width for a 6–10 in. drop on each side. Go shorter for casual or outdoor dining, longer for more formal looks.
• Round: Add 12–20 inches to the diameter. For example, a 48 in. round table often pairs with a 60–70 in. round cloth.
• Fitted styles: Some elastic-edge options list the tabletop range they fit (e.g., 45–54 in.).
• With leaves: Measure at the largest setup.

Match the shape (round, rectangle, oval, square), and if you have an umbrella, look for an umbrella-hole design.

Many options here are designed for patios and picnics, but it helps to match features to your setup.

• Look for: Waterproof or spillproof fabrics, wipeable vinyl/oilcloth, and styles with an umbrella hole and zipper for tables with a center pole.
• Windy spots: Fitted elastic-edge designs or tablecloth clips can help reduce shifting.
• Care tips: Let the cloth dry fully before storing; extended sun exposure may affect colors over time.
• Safety: Keep table linens away from open flames and hot grill surfaces.

Check each product’s description for indoor/outdoor notes and features so you can choose what suits your space.

Care can vary by material, so check the product page for specifics. Here’s general guidance:

• Wipeable vinyl/oilcloth: Wipe spills with a damp cloth and mild soap. Avoid abrasive scrubbers and high heat. Air-dry.
• Polyester/cotton fabrics: Machine wash cold on gentle, using mild detergent. Avoid bleach unless the care instructions allow it. Tumble dry low and remove promptly to limit wrinkles.
• Wrinkle-resistant finishes: After drying, smooth the cloth directly on the table; a light, low-heat touch-up may help if permitted.

For lace or cutwork, use delicate settings and gentle steaming. Results can vary by finish, so follow the listed care instructions when available.

There are a few easy ways to add grip without sacrificing style:

• Choose fitted styles: Elastic-edge tablecloths hug the tabletop and help resist movement.
• Add clips: Tablecloth clips are useful for outdoor tables and breezy days.
• Use a liner: A non-slip underlay (like a thin rug pad or shelf liner) between the table and cloth can increase friction.
• Check the drop: A slightly longer overhang (about 6–10 in. per side) adds gentle weight.
• Anchor decor: A runner or a weighted centerpiece can provide extra stability.

For delicate surfaces, test liners in a small area first.

Shipping folds are common and usually relax with a little care.

• Polyester/cotton: Tumble dry on low with a damp, clean cloth for 10–15 minutes, then smooth onto the table. If allowed, use a warm iron on the reverse.
• Vinyl/oilcloth: Lay flat in a warm room to soften. You can gently warm with a hairdryer at a distance and smooth by hand. Avoid direct hot irons.
• Lace or cutwork: Hang and steam lightly from a safe distance.

Always follow the care instructions listed on the product page or packaging. Results can vary by fabric and finish.