Pick based on how wet the speaker or radio will get:

• IPX4: Handles light splashes if it’s mounted away from direct spray.
• IPX5–IPX6: Better for frequent spray and steamy bathrooms.
• IPX7: Rated for temporary submersion; helpful near tubs, pools, or if you plan to rinse it quickly.

Close any port covers before showering, mount securely (suction cup or hook), and wipe it dry afterward. Steam can linger, so storing it outside the stall between uses can help extend lifespan. You can confirm the exact waterproof rating on each product page, which can guide you to a level that matches your routine and bathroom setup.

It depends on how you like to listen:

• Bluetooth shower speaker: Streams playlists and podcasts from your phone, often with features like hands-free calling (on models with a mic), LED lights, or stereo pairing. You’ll need a nearby device for audio and a charged battery.
• AM/FM shower radio: Plays live radio without a phone, great for news, music, and sports. Some models offer digital tuning or weather alerts. Reception can vary in bathrooms due to walls and plumbing.

Consider the waterproof rating, mounting style (suction cup or hook), battery type (rechargeable or replaceable), size, and controls. Check each product page for the features that fit your routine.

1. Pick the spot: Choose smooth, non-textured tile or glass. Avoid grout lines and uneven surfaces.
2. Clean first: Wipe the area dry and free of soap residue so the suction cup can seal properly.
3. Press firmly: Apply steady pressure to remove air pockets. If your unit includes a hook or strap, hang it from a shower caddy or rod instead.
4. Test the hold: Give it a gentle tug before use and place it where a slip won’t cause damage.
5. Maintain: Re-seat the suction cup periodically; humidity and temperature changes can loosen the seal over time.

Mounting methods vary by model, so refer to the item’s instructions for best results.

• Reposition the radio: Mount higher, try a wall closer to a window or doorway, and keep it away from large metal fixtures when possible.
• Adjust the antenna: Extend it fully (if included) and rotate the radio for the clearest signal.
• Rescan and fine-tune: Use auto-scan or slow tuning to lock onto stronger stations.
• Reduce interference: Separate it slightly from other electronics and mirrors; fresh batteries or a full charge can also help.
• Consider alternatives: If reception is limited by building materials, streaming via a Bluetooth shower speaker can provide more consistent audio.

Signal strength varies by location and construction, so trying a few placements often yields the best result.

1. Power down: Turn it off and disconnect cables. Close any port covers before cleaning.
2. Wipe gently: Use a soft, damp cloth with mild soap if needed. Avoid solvents or abrasive cleaners on the housing or grille.
3. Mind the rating: For higher ratings (like IPX7), a light rinse may be acceptable. Avoid directing pressurized water into ports or the speaker mesh.
4. Dry fully: Pat dry and let it air-dry before charging. Keeping ports dry helps protect the battery and connectors.
5. Store smart: When not in use, keep it out of the stall to limit prolonged steam. Recharge regularly and check seals, suction cups, or hooks for wear.

Care routines vary, so review the product’s instructions for model-specific guidance.