It depends on the surface and the mess you’re tackling.

• Plastic blades: Safer for delicate surfaces like car paint, nonstick cookware, acrylic, and some plastics. They’re great for stickers, decals, and light adhesives when you want to avoid scratches.
• Metal blades: Better for hard, scratch-resistant surfaces like glass, ceramic cooktops (if your appliance manual allows), and bare metal. They can help with thick paint or stubborn residue.

Keep the blade at a low angle and use light pressure. When unsure, start with a plastic blade and test in a small, hidden spot. Many scraper sets include both types; check product details and reviews on Walmart.com to match your task.

For glass windows and ceramic/induction cooktops, choose a tool that balances effectiveness with care.

• Glass windows: A metal razor blade can work if used gently at a low angle with soapy water as lubricant. Avoid coated or tinted glass unless the manufacturer says it’s safe.
• Cooktops: Use a cooktop-safe scraper or a plastic blade to minimize scratching. Soften residue with a cooktop-safe cleaner and let it sit before scraping.

Replace dull blades often, keep strokes short, and wipe debris as you go. Always check your appliance’s manual for surface-specific guidance, as recommendations can vary by model.

Go slow and let the scraper do minimal work.

1. Soften the adhesive: Apply warm, soapy water or a surface-safe adhesive remover. Let it sit a minute. A hair dryer on low, kept moving, can also help loosen residue.
2. Use a plastic blade: Hold it at a shallow angle and gently lift an edge, working in small sections.
3. Peel and roll: Pull the sticker back on itself; use the scraper to guide stubborn areas.
4. Clean up: Wipe remaining adhesive and residue with a soft cloth.

Always test cleaners in an inconspicuous spot first. Pressure and results may vary by paint condition, so take your time.

Look for a dedicated plastic or nylon pan scraper with smooth, rounded edges.

• Material: Nylon or polycarbonate tools are designed to be gentle on nonstick coatings.
• Shape: Scrapers with curved corners fit pan contours and help lift stuck-on bits without gouging.
• Use: Soak the pan in warm, soapy water, then nudge residue with light pressure. Avoid metal or razor blades on nonstick surfaces.
• Heat resistance: Choose a scraper that’s rated for kitchen use; avoid scraping on a hot burner.

Check product descriptions on Walmart.com for compatibility details and care instructions, as pan finishes can vary by brand and age.

Take a few safety steps to keep swaps quick and tidy.

1. Prepare the tool: Retract or cover the blade and place the scraper on a stable surface.
2. Swap the blade: Wear gloves if available. Loosen the fastener or slide mechanism, carefully remove the old blade, and insert the new one with edges aligned. Re-tighten securely.
3. Store used blades: Place dull blades in a rigid container (like a blade case or thick cardboard) before disposal.
4. Safe storage: Retract the scraper and keep tools and refill blades out of reach of children.

Check your scraper’s instructions for the correct blade size and type. Replacement blade packs are commonly available on Walmart.com.