Mouse feet—also called skates or glides—are the thin, low‑friction pads on the bottom of your mouse that help it slide smoothly across a mousepad or desk. On this page, you’ll see a mix of options:

• Model-specific sets: Pre-cut shapes that match a particular mouse’s underside.
• Universal dots: Small round pads in various diameters for flexible placement.
• Materials and features: Choices include silicone and glass options, plus designs labeled high durability, shock-absorbing, low noise, or curved edges.
• Thickness and sizing: Some sets note measurements (e.g., 0.6 mm) to help you match feel and clearance.

The right set can refine glide and control, but results can vary by surface and setup.

They’re usually thin, adhesive-backed pads that stick to the underside of your mouse. You’ll find two main looks:

• Pre-cut shapes: Rings, arcs, or strips that mirror the original feet layout of specific mice. These often mention curved edges to help reduce catching.
• Universal dots: Small round stickers in multiple diameters you place wherever needed for extra glide or balance.

Colors vary—black, white, even pink are common here. Some sets list a thickness (like 0.6 mm) to indicate profile. If you flip your mouse over, you’ll recognize them as the smooth pads that contact your mat.

They influence how your mouse feels and sounds as it moves. Depending on the set you choose, you may notice:

• Glide speed: Some options are tuned for high speed, especially those labeled for glass mousepads.
• Control and stability: Shock-absorbing or high-rebound designs can dampen micro-vibrations for steadier tracking.
• Noise: Low-noise styles can help reduce scraping sounds on hard surfaces.
• Consistency: Replacing worn feet can restore a smoother, more predictable glide.

Universal dots let you fine-tune placement, while model-specific sets aim to replicate the original feel. Actual results vary with your pad, surface, and mouse weight.

1. Confirm compatibility: Choose feet made for your model or universal dots sized to your needs.
2. Power down: Unplug or turn off the mouse.
3. Remove old feet: Gently lift them with a plastic card or fingernail, taking care around the sensor.
4. Clean the surface: Wipe away residue so the new adhesive bonds well.
5. Align and apply: Position the new feet carefully, then press firmly for even contact.
6. Settle and test: Give the adhesive a little time to set (per the product’s instructions), then test on your mat.

Installation steps can vary, so it’s a good idea to follow the directions included with the specific set you purchase.

Both work—your choice comes down to goals and convenience:

• Universal dots: Flexible placement and sizing (often around 5–9 mm diameters) let you customize glide or add support where you need it. Handy for older mice or fine-tuning feel.
• Model-specific feet: Pre-cut shapes match your mouse’s original layout and often feature curved edges for smooth movement. Great if you want an OEM-like feel with straightforward installation.

If you use a hard or glass pad, look for sets labeled specifically for those surfaces. Check product photos and measurements on the page to confirm fit and the glide profile you prefer.