Start with where and how you’ll use it, then match features to fit.

• Mounting style: Choose wall, ceiling (flush-mount), magnetic, or bike/handlebar mounts based on your space.
• Power: Battery-powered is flexible; wired/plug-in models can offer continuous play without recharging.
• Durability: For kitchens, patios, or bathrooms, look for water-resistant designs and an IP rating noted on the product page.
• Sound/size: Larger drivers and multi-speaker sets can help fill bigger rooms; compact speakers suit desks or small areas.
• Connectivity: Check Bluetooth version, AUX-in (if you want a wired option), and any True Wireless Stereo (TWS) or multi-speaker pairing.
• Extras: LED lighting, carabiners, or built-in radios can add convenience.

Outdoor mounting can work well with the right design and care.

• Weather protection: Look for an IP rating and materials described as water-resistant or rust-resistant. Higher ratings generally indicate stronger protection against splashes and moisture.
• Placement: Mount under eaves or a covered area when possible. Avoid direct, prolonged sun exposure and standing water.
• Temperature: Product pages may note operating ranges; bringing portable models indoors during extreme heat or freezing conditions can help longevity.
• Hardware: Use corrosion-resistant screws/anchors and check brackets seasonally to keep them secure.
• Care: Keep charge ports covered when not in use and wipe off dust, salt, or pool spray as needed.

Most models include brackets or mounting points; a few simple steps can help.

1. Review the manual: Confirm recommended orientation, hardware, and clearance for ports/cables.
2. Pick the spot: Choose a location near power (if needed) and where Bluetooth reception is strong.
3. Find support: Mount into a stud when possible. If not, use wall anchors rated for the speaker’s weight.
4. Attach bracket first: Level the bracket, drill pilot holes, and secure it snugly.
5. Hang and aim: Angle toward your main listening area and tighten fittings.
6. Safety note: Avoid drilling near electrical/plumbing lines. If unsure, consider a professional installer.

Many portable models support True Wireless Stereo (TWS) or party modes, but steps vary.

1. Check the listing: Look for "stereo pairing," "TWS," or "multi-speaker" in the features.
2. Match the speakers: Stereo pairing often works best between two identical models.
3. Link the speakers first: Put both into their TWS pairing mode so they connect to each other (one becomes left/right or primary/secondary).
4. Connect your device: Pair your phone or tablet to the primary unit after the speakers link.
5. Fine-tune: Keep speakers within Bluetooth range and in clear line of sight for a stable connection.

For multi-speaker “party” linking, follow the specific instructions provided in the manual.

Connection options depend on both the TV and the speaker’s inputs.

• Bluetooth pairing: If your TV supports Bluetooth audio, put the speaker in pairing mode and select it in the TV’s Bluetooth settings. Lip-sync settings on the TV may help reduce delay.
• Wired fallback: If the speaker has AUX-in and your TV has a headphone or line-out jack, use a compatible audio cable.
• Placement tips: Mount the speaker within Bluetooth range of the TV and avoid obstructions.
• Check details: The product page and manuals typically list supported profiles and inputs, which can guide the best connection method.