Nano‑SIM (4FF) is the physical SIM size used by this model. It does not use eSIM, so you’ll want a physical card that fits the smallest cutout in a 3‑in‑1 kit.

• Choose a universal 3‑in‑1 SIM kit and punch out the nano size.
• Make sure your phone is unlocked or compatible with your carrier before activating.
• Pick a plan that supports 4G LTE voice and data (availability can vary by area and provider).
• Handle the SIM and tray gently—don’t force the fit.

You can find universal starter kits online or in stores. If you’re unsure, compare your current card to the kit’s cutouts or check compatibility with your carrier before opening the package.

This model supports 4G LTE for voice and data, which many providers still use. It doesn’t support 5G, but a compatible LTE SIM and plan can still work well in areas with LTE coverage.

• Confirm your area has LTE service; 3G shutdowns don’t affect LTE‑capable devices the same way.
• Verify the device is unlocked or approved for your chosen carrier.
• Check that your plan includes VoLTE (voice over LTE) where offered.
• Use your device’s IMEI with your carrier’s compatibility check before buying a SIM.

Network support can vary by location and provider policies. A quick compatibility check and an LTE‑ready SIM kit from our site or stores can help you avoid activation surprises.

You can swap the SIM in a few careful steps. These tips can help, but exact steps may vary by case or accessories.

1. Power off your phone.
2. Find the SIM tray on the right edge.
3. Insert a SIM tool or small paperclip into the tiny hole and press gently until the tray pops out.
4. Remove the tray, lift out the SIM, and place the new card with the notch aligned.
5. Slide the tray back in, flush to the edge, and power on.

If you see “No Service,” confirm your plan is active, toggle Airplane Mode, or restart. Avoid forcing the tray or using sharp tools. Store the SIM and tool safely—they’re easy to misplace.

Both phones accept a nano‑SIM for physical cards. Some newer models also support eSIM, but you can usually move a physical nano‑SIM if your plan and devices are compatible.

1. Back up your data, then power off both phones.
2. Eject the SIM from the old phone and place it in the newer phone, matching the notch.
3. Power on and wait for signal; you may be prompted to update carrier settings.
4. If data or calls don’t work, check that the device is unlocked and your plan supports the newer phone.

Avoid cutting SIMs; use a 3‑in‑1 kit if your current card isn’t nano. Activation steps and features can vary by provider, so consult your plan details if anything looks off.

Activation steps can vary by provider, but this general flow can help:

1. Choose a compatible SIM kit (3‑in‑1 is helpful) and plan that supports 4G LTE.
2. Power off your phone and insert the nano‑SIM.
3. Follow the kit’s activation instructions—typically online or by phone. Have your SIM number and device IMEI handy.
4. Power on, wait a few minutes for signal, then make a test call and try data.
5. If data doesn’t work, update carrier settings and check or enter APN settings as directed by your provider.

Keep any existing service active until the new line is live to avoid interruptions. You can pick up SIM kits online or in store; timing and requirements vary by carrier and location.