Getting HDMI from your tablet to a TV or monitor usually takes a small adapter and a standard HDMI cable.

• Match the port: Devices with USB‑C use a video‑capable USB‑C to HDMI adapter or cable. Older models with a Lightning port need a Lightning‑to‑HDMI digital AV adapter.
• Add an HDMI cable: Connect the adapter to the TV, monitor, or projector.
• Consider power: Adapters with pass‑through charging can keep your device powered during longer use.
• Check resolution needs: For 4K or higher refresh rates, pick gear labeled 4K@60Hz or similar. Actual results vary by device and display.

After connecting, select the correct HDMI input on your screen to view your content.

You can set it up in a few quick steps:

1. Choose the right adapter: Use a USB‑C to HDMI adapter/cable for USB‑C models, or a Lightning‑to‑HDMI adapter for older models.
2. Connect the hardware: Plug the adapter into your device, then run an HDMI cable from the adapter to an open HDMI port on the TV.
3. Power if available: If the adapter has a charging port, connecting power can improve stability for longer sessions.
4. Select the input: On the TV, switch to the HDMI input you used.
5. Adjust settings: If the image looks cropped or small, check the TV’s picture settings (overscan, aspect) for a better fit.

Playback quality depends on your adapter, cable, and the TV’s capabilities.

A few checks can help get video on your TV or monitor:

• Confirm compatibility: Make sure the adapter matches your device’s port (USB‑C vs. Lightning) and supports video.
• Reseat connections: Unplug and firmly reconnect the adapter and HDMI cable on both ends. Try a different HDMI port on the TV.
• Try another cable: A high‑speed HDMI cable can improve signal reliability, especially for 4K.
• Add power: Some adapters/hubs work more reliably when powered via pass‑through charging.
• Update software: Install the latest system updates on your device.
• App restrictions: Certain apps limit HDMI output due to rights management; test with the home screen or another app.

If issues persist, checking the display’s supported resolutions and refresh rates may help.

Look for a video‑capable USB‑C to HDMI solution and match it to your display needs.

• Video support: Choose an adapter or cable that specifies video over USB‑C (often noted as DisplayPort Alt Mode). Data‑only or charge‑only USB‑C accessories won’t output video.
• Resolution and refresh: For sharper output, pick options labeled 4K@60Hz or higher. Actual performance depends on your device and display.
• HDR and color: If your TV supports HDR, look for adapters/cables that mention HDR compatibility.
• Power delivery: Pass‑through charging helps keep your device powered while connected.
• Cable length and build: Shorter, well‑shielded cables can reduce signal issues.

Compatibility details vary, so checking your device’s video output specs is a good step.

In most setups, HDMI carries both video and audio to your TV, monitor, or receiver.

• Volume and input: Make sure the TV is set to the correct HDMI input and its volume isn’t muted.
• Device audio output: If audio is still missing, check your device’s sound settings and select the external display as the output if available.
• Adapter power: Some hubs/adapters pass audio more consistently when powered via pass‑through charging.
• TV audio format: If you hear nothing or distortion, setting the TV or receiver to PCM/Stereo can help.
• Cable check: Try a different high‑speed HDMI cable if issues continue.

Results can vary by app and hardware, but these steps often improve audio playback.