You can swap in a new drawstring with a few simple tools.

1. Measure and choose: Pick a cord close to your original. Many replacements are around 51–55 inches; width should fit your eyelets (common flats ~10–12mm, rounds ~6mm).
2. Prep the cord: Tape the ends to reduce fraying.
3. Thread it: Attach one end to a large safety pin or an easy threader, then feed it through the casing from one eyelet to the other, inching the fabric along.
4. Finish: Center the cord, tie end knots, or add cord locks for adjustability.

Threader tools and replacement cords are available on this page. Results can vary based on fabric and casing thickness.

Getting it back in is doable with a little patience.

1. If it’s partly out: Pinch and inch the casing to ease the cord back to center.
2. If it’s fully out: Tape an end, attach a safety pin or threader tool, and guide it through the hood channel from one eyelet to the other, keeping the fabric smooth to avoid snags.
3. Secure the ends: Tie small knots or add cord locks to help prevent future slip-throughs.

Taping frayed ends and working in small sections can make the job smoother. Depending on the garment, a slim threader may glide more easily than a bulky pin.

It’s commonly called a drawstring, drawcord, or simply a hoodie string.

• Styles: Flat or round cords, plus elastic versions for extra give.
• Ends: Many have plastic or metal tips to reduce fraying.
• Accessories: Cord locks (spring toggles) help with quick tightening and keep the cord in place.

You’ll find replacement drawstrings, cord locks, and threader tools on this page in various lengths, widths, and colors. Choosing a cord that fits your eyelets and matches your hoodie’s look can help it function well and blend in. Availability may vary by style and inventory.

The straw trick can work if you don’t have a threader.

1. Prep the end: Wrap 2–3 inches of the cord end with tape for stiffness.
2. Attach to straw: Insert the taped end into a drinking straw and tape them together securely.
3. Feed through: Push the straw into one eyelet and guide it through the casing by pinching and inching the fabric along until it emerges from the other side.
4. Finish: Pull the cord through, remove the straw, center the ends, and tie knots or add cord locks.

Go slowly to avoid stressing seams. A purpose-made threader can offer a smoother experience, but either method can work depending on your hoodie’s casing.

Both work—your best pick depends on look, feel, and fit.

• Flat cords: Lay neatly and tend to stay put; common widths are around 10–12mm.
• Round cords: Glide easily for quick cinching; many are ~6mm and fit smaller eyelets.
• Elastic options: Add stretch for comfort during movement.
• Fit check: Match cord width to your eyelet and casing; many replacements are 51–55 inches, but measuring your hoodie’s channel helps.
• Style: From basic cotton to colorful sets and even rhinestone looks, choose what suits your hoodie.

You can explore cords, locks, and threaders here and select pickup or delivery at checkout. Preferences may vary by garment.