To check if a replacement cable fits your watch, start with the exact model name. Most recent multisport models use a small, four‑pin port on the back, while some earlier generations use a clip or cradle.

• Match your model to the compatibility list on the product page.
• Compare the watch‑end connector in photos to your watch’s port.
• Choose the plug for your power source (USB‑A or USB‑C).
• Pick a length and features you prefer (braided, angled, 2‑pack).

If your watch uses a clip/cradle, look for a listing that explicitly mentions that style. When in doubt, the compatibility list is your best guide.

The model you’re asking about typically uses a proprietary, four‑pin charging/data port on the back of the watch. Cables on this page are designed with that watch‑end connector.

• Select a cable with the four‑pin watch connector.
• Pick the other end based on your charger or computer (USB‑A or USB‑C).
• Decide on length and extras like braided jackets or L‑shaped ends.
• If you need wired sync, look for “charge + data” in the description.

Compatibility can vary by generation, so it’s a good idea to confirm your exact model is listed on the product page before purchasing.

Charging through USB requires a cable that has your watch’s dedicated charging connector on one end and a standard USB plug on the other.

• Watch end: the specific charging interface that fits your watch (often a four‑pin contact port or, on some older models, a clip/cradle).
• USB end: choose USB‑A or USB‑C to match your power source or laptop.
• Connect to a USB power adapter or computer per your device guidelines.
• If data transfer matters to you, confirm the cable supports it.

A regular phone/data cable without the watch‑side connector won’t attach to the watch. Checking photos and the model compatibility list can help you pick the right one.

Misplaced the original cable? You can replace it quickly with a compatible option.

1. Identify your exact watch model and the connector style (four‑pin vs. clip/cradle).
2. Open a cable listing and confirm your model appears in the compatibility list.
3. Choose the USB plug you prefer on the charger side (USB‑A or USB‑C).
4. Pick the length and features you like; 2‑packs are handy for home/work.
5. At checkout, select the delivery or pickup option that suits your schedule.

Keeping a spare can reduce downtime if one goes missing again. If you’re unsure about the connector, comparing the listing photos to your watch’s port is a practical way to verify fit.

Some cables provide both charging and data transfer, while others are charge‑only.

• Look for phrases like “data sync” or “charge and data” in the title or description.
• For computer transfers, connect the cable’s USB end to a laptop/desktop (USB‑A or USB‑C, depending on the cable).
• Results can vary by watch model and software settings; a charge‑only cable won’t move files.
• Dock‑style accessories (where applicable) may also support data on models that use them.

If you need wired sync, choosing a cable that explicitly notes data support and verifying your model in the compatibility list can help avoid surprises.