For under-eave installs, look for outdoor security lights labeled for wall/eave mounting with adjustable heads so you can aim light along the driveway or walkway. Features to consider include:

• Power source: Solar for easy setup, or hardwired for dependable power.
• Controls: Motion-activated for security, dusk-to-dawn for all-night lighting, or selectable modes.
• Weather rating: IP65 or higher for rain and dust resistance.
• Coverage: Wide-angle designs with multiple heads help reduce shadows under eaves.
• Light quality: Cooler “daylight” tones can improve visibility, while warmer tones feel cozier.

Aim the heads to reduce glare into neighbors’ windows, and confirm the fixture’s weight and mounting plate suit your soffit or fascia.

Many outdoor security lights on this page are designed for wall or eave mounting, but it’s important to confirm in the product details. Keep in mind:

• Mounting orientation: Some fixtures are built for vertical walls only; others include hardware for horizontal under-eave installs.
• Wired installs: Typically require an exterior-rated junction box. Turn power off at the breaker and consider a licensed electrician if you’re unsure.
• Solar installs: Place the unit where the panel receives direct sun and use the included anchors.
• Safety: Don’t block soffit vents, and use sealant as directed to protect against moisture.

Always follow the manufacturer’s instructions specific to your light.

Start with how you want it to work and where it’ll go. Then narrow by features:

• Power: Solar lights simplify installation; hardwired lights offer consistent, line-powered performance.
• Control modes: Motion-only for alerts, dusk-to-dawn for continuous nighttime lighting, or lights with multiple modes you can switch.
• Coverage: Adjustable, multi-head designs can spread light along walls and driveways; check the stated detection angle for motion sensors.
• Weather resistance: An IP65 or higher rating helps with rain and dust.
• Light quality: Choose daylight tones for clarity or warmer tones for a softer look.

Also consider extras like remotes or timers, and read customer reviews on Walmart.com for real-world feedback.

Frequent triggers usually point to placement or settings. These steps can help:

• Adjust sensitivity and range: Start lower, then increase until it covers your target area without picking up distant traffic.
• Re-aim the sensor: Point slightly downward and away from streets, HVAC vents, or swaying branches.
• Mounting height: Keep within the manufacturer’s recommended height for reliable detection.
• Clean the lens: Dust, water spots, and insects can affect performance.
• Check the mode: Ensure it’s not in a test or manual override mode.
• Solar notes: Low charge can cause erratic behavior; allow adequate sun exposure.

If issues persist, consult the product manual’s troubleshooting section or contact the manufacturer listed there.

You can mount solar security lights under eaves, but performance depends on sun exposure. Consider:

• Sunlight access: Solar panels need direct sun for several hours; shaded eaves may limit charging.
• Placement: If the area is mostly shaded, consider positioning the unit on a sunnier fascia or choosing a hardwired light instead.
• Orientation: Angle the panel toward the sun and keep it clean to maximize charging.
• Modes: Motion-activated modes typically use less energy than all-night operation.

Results can vary by season and weather. Reviewing the product’s installation notes and recommended mounting locations can help you get reliable performance.