Bluetooth support can vary by model, so a quick specs check helps.

• Check the product details: Look in the specifications for terms like “Bluetooth,” “Bluetooth audio,” or “Wireless audio (Bluetooth).” Some TVs include Bluetooth for remotes only, not for headphones or speakers.
• Look for audio profile notes: Mentions of headphone or speaker pairing usually indicate audio streaming, not just remote pairing.
• Review the manual: The user guide often lists supported wireless features and pairing steps.
• Scan Q&A and reviews: Other shoppers often note if they’ve paired headphones or soundbars.

If you don’t see a clear mention of Bluetooth audio, it’s reasonable to assume you’ll need an add-on transmitter to use wireless headphones or speakers.

A simple way is to use a Bluetooth audio transmitter. It connects to your TV’s audio output and pairs with your headphones or speaker.

1. Pick the right connection: Match the transmitter to your TV’s outputs (optical/TOSLINK, 3.5mm headphone jack, or RCA).
2. Set TV audio: In sound settings, choose the external/optical output and set format to PCM if needed.
3. Pair your device: Put the transmitter and your headphones/speaker in pairing mode.
4. Fine-tune: Adjust TV or transmitter lip-sync settings to help reduce delay.

Results can vary based on your TV and room setup, but a quality transmitter and a clear line-of-sight typically provide a more consistent connection.

If your TV supports Bluetooth audio, pairing is usually quick.

1. Enable pairing on headphones: Hold the headphone’s Bluetooth button until the light flashes or you hear a prompt.
2. Open TV settings: Go to the TV’s Bluetooth or Connections menu and scan for devices.
3. Select your headphones: Choose them from the list and confirm pairing.
4. Set audio output: In sound settings, switch output to Bluetooth if it doesn’t switch automatically.

Tips: Keep other Bluetooth devices off during setup to avoid conflicts, stay within a few feet for first pairing, and make sure the headphones are charged. Some TVs mute built-in speakers when Bluetooth is active and may output stereo only.

Bluetooth audio can introduce delay, especially with movies or games. These steps may help reduce it:

• Use low-latency gear: Headphones/transmitters that support low-latency modes can help minimize lip-sync issues.
• Adjust AV sync: Many TVs include a lip-sync or AV sync setting to align audio with video.
• Minimize interference: Keep the TV and headphones close, reduce obstacles, and move Wi‑Fi routers or cordless devices away if possible.
• Try Game Mode: Enabling Game Mode can lower processing time on some TVs.
• Consider alternatives: For critical timing (gaming), wired connections or HDMI ARC/eARC soundbars may offer more consistent sync.

Improvements vary by device and environment, so a bit of tuning often helps.

You have a couple of paths, depending on your TV’s capabilities:

• Built-in dual audio: Some TVs allow two Bluetooth audio connections at the same time. Check the specs or sound settings for dual/headphone sharing features.
• Dual-link transmitter: If your TV doesn’t support it, a Bluetooth transmitter that supports two concurrent connections can send audio to two headphones.
• Expect trade-offs: In many cases, audio is limited to stereo, and there can be slight delay differences between headphones.
• Placement matters: Keep both listeners within a reasonable range and line-of-sight to the TV or transmitter.

Exact performance depends on the headphones, transmitter, and room layout.