Moving framed art takes a little prep. Here’s a simple approach:

1. Measure your piece and pick a picture/mirror box with a bit of extra room for padding.
2. Slip on foam corner protectors and wrap the item in bubble roll.
3. Add a flat sheet of cardboard on the front and back for extra rigidity.
4. Build the box, cushion the bottom with crumpled kraft paper, and slide the artwork in upright.
5. Fill any side gaps so it can’t shift, then tape all seams securely.

Label “Fragile” and “This Side Up,” and transport it upright. These steps can help reduce movement and surface pressure, but use your judgment based on the frame, glass, and trip length.

For framed pictures and mirrors, consider these box types:

• Adjustable picture/mirror boxes: Two-piece, telescoping panels that fit a range of frame sizes and help protect edges.
• Flat corrugated boxes: Low-profile boxes for slim frames, matted prints, or panels.
• Universal flat-screen style boxes: Rigid kits with corner cushions and bubble roll that also fit large, flat pieces.
• Square mailing tubes: For rolled posters and prints (not for glazed frames).

Match the box to your art’s dimensions and thickness, and look for heavier-duty board (such as ECT-32) if you expect stacking or a longer move. Add corner protectors and internal padding to help minimize flex and vibration.

You’ve got a few easy options:

1. Shop online and search for picture/mirror boxes, flat corrugated boxes, universal packing boxes, or mailing tubes.
2. Check interior dimensions, thickness, and any strength ratings to match your artwork.
3. Consider kits or multi-packs if you’re packing several pieces; you can add bubble roll, foam corners, and tape in the same order.
4. Choose delivery or store pickup where available; selection can vary by location.

Quick tip: measure height, width, and depth of each piece (including the frame) and keep those notes handy while you browse, so you can select the right fit the first time.

Shipping artwork typically calls for stiffer packaging and extra cushioning:

1. Pick a shipping-ready container: flat corrugated boxes sized to the piece, dedicated picture-frame boxes, or square mailing tubes for rolled prints.
2. Wrap the item in bubble roll and protect corners; add flat pads front and back to reduce flex.
3. Fill all voids with kraft paper or foam sheets and seal every seam with strong tape.
4. For delicate or high-value pieces, consider double-boxing with at least 2 inches of padding between boxes.

Mark “Fragile” and “This Side Up.” Carrier handling can vary, so reviewing your chosen carrier’s packing guidelines and coverage options may help you decide how much protection to add.

Start with measurements and plan for padding:

• Measure the frame: Height, width, and depth, including any hardware.
• Add clearance: Choose a box that allows about 2–3 inches of cushioning on all sides.
• Telescoping flexibility: Two-piece picture/mirror boxes can adjust to fit oversized frames; you can pair panels for larger dimensions.
• Match format: Flat corrugated boxes suit slim pieces; mailing tubes work for rolled posters.
• Weight matters: Don’t exceed the box’s rating; if in doubt, size up and add padding rather than forcing a tight fit.

This approach can help you balance protection and packability without adding unnecessary bulk.