It depends on the model generation. There isn’t one universal charger across the lineup. You’ll typically see three styles:

• Micro‑USB port: Common on earlier battery cameras. Look for weather‑resistant tips if you’re routing outdoors.
• Magnetic snap‑on connector: Used by many newer, high‑resolution battery cameras for quick attach/detach charging.
• Cord‑style straight plug: Found on certain second‑generation outdoor models designed for continuous power.

Before you buy, match the cable to your exact model and port shape, confirm indoor/outdoor rating, and choose a length that fits your run (short for near outlets, longer for eaves). If a power adapter is included, use it; if not, check the product page for recommended output to help maintain reliable charging.

Many earlier battery models use a micro‑USB charging port on the camera side and a standard USB‑A plug at the wall adapter. For outdoor setups, consider these details:

• Weather‑resistant collar: A snug micro‑USB tip helps protect the port from moisture.
• Cable shape: Flat cables can route through window gaps or along trim more cleanly than round ones.
• Length: Options range from short (about 3–6 ft) to long runs (20–30+ ft). Measure first to avoid slack or strain.
• Adapter compatibility: If a wall adapter isn’t included, check the listing for recommended voltage/current so your existing adapter is a suitable match.

Always confirm model compatibility in the product description before purchasing.

On this page, camera charging options are most often micro‑USB or a magnetic snap‑on connector rather than USB‑C. It’s also helpful to separate the two ends of a cable:

• Camera end: Typically micro‑USB or a dedicated magnetic head that mates with the camera’s charging contacts.
• Power end: Often USB‑A into a wall adapter, sometimes supplied with the cable.

If your camera has a magnetic charging pad or a small micro‑USB port, a USB‑C cable won’t fit that device side. Check your camera’s port shape and the compatibility list on the product page to choose the correct cable style for your setup.

Earlier “Pro” generations typically charge via a micro‑USB port, while newer lines may use a magnetic connector. The quickest way to confirm is to check the charging port on your camera and match it to the cable description:

• Micro‑USB: Choose a cable with a snug, weather‑resistant tip for outdoor use.
• Magnetic: Look for a magnetic charging head that matches your model’s contact layout.
• Length and routing: Select a cable length that avoids tension and supports clean routing along walls or eaves.

Because compatibility varies by generation, always verify the exact model name against the cable’s compatibility list before buying.

Continuous power outdoors can be reliable with the right setup. A few tips:

• Pick a weather‑rated cable: Look for outdoor or weather‑resistant labeling and a snug connector.
• Measure your run: Choose a length that avoids strain; longer runs help reach eaves or soffits.
• Route neatly: Use clips, avoid sharp bends, and create a drip loop so water doesn’t run into the connector.
• Protect connections: Keep junctions off the ground and out of standing water.
• Use a suitable outlet: An outdoor‑rated, properly protected outlet can help reduce risk.

These steps can support dependable power, but conditions vary. Always follow the cable’s instructions and local guidelines for safe installation.