Need a quick fix for frayed shoelace ends? Here are a few easy, low-tool options you can try at home. Results can vary based on lace material and technique.

1. Heat-shrink tubing: Cut a short piece (about 20–25 mm). Slide it over the lace end and compress the fibers. Warm with a hair dryer on low until it shrinks snugly. Let it cool. Avoid open flames.
2. Tape wrap: Trim frays. Wrap tightly with clear packing tape or cloth athletic tape, spiraling to form a point. Press seams firmly.
3. Thread + clear-drying glue: Wrap sewing thread tightly around the end, then seal with a small amount of clear-drying glue. Allow to dry fully per the glue’s instructions.

For a longer-lasting finish, consider replacement aglet tips (metal, plastic, or screw-on) available at Walmart.

You’ve got several good options depending on your lace style and how permanent you want the fix to be:

• Metal screw-on tips: Durable and polished look. Typically secure with a small set screw.
• Crimp caps: Grip the lace with a gentle squeeze for a clean, permanent end.
• Open-mouth/flat caps: Sized for flat laces and drawstrings to keep their profile.
• Plastic sleeves: Lightweight, budget-friendly replacement tips in multiple colors.
• Heat-shrink tubing: Simple DIY sleeve that tightens with low heat (e.g., hair dryer).
• Decorative end caps: Add color or metallic accents for a custom look.

Match the inner diameter to your lace thickness (flat vs. round) and check length so the finished tip fits through eyelets or grommets. Walmart carries multipacks and assorted colors for easy projects.

Tape can work as a quick, temporary aglet to get you through relacing or a day’s wear. Here’s a simple approach:

1. Prep the lace: Trim away loose fibers so the end is clean and even.
2. Optional stiffener: Roll a tiny strip of paper around the tip for shape before taping.
3. Wrap tightly: Use clear packing tape or cloth athletic tape. Spiral from the lace downward, finishing flush at the end. Press seams firmly to seal.
4. Shape the tip: Pinch to create a slight point so it threads easily.

Adhesive can loosen with moisture or friction, so this is best as a short-term fix. For a cleaner, longer-lasting result, consider plastic or metal aglet replacements or a heat-shrink kit from Walmart.

Getting the right size helps your laces thread smoothly and stay secure:

1. Measure your lace: For round laces, note the diameter; for flat laces, check thickness when folded and overall width.
2. Match inner diameter: Choose aglets with an inner opening just larger than your measurement so the lace fits snugly.
3. Pick the right shape: Use cylindrical tips for round/rope laces; open-mouth or flat-head caps for flat laces and drawstrings.
4. Check length: Common lengths are about 20–25 mm; ensure the finished tip will pass through your shoe’s eyelets or garment grommets.
5. Consider weight and finish: Lighter plastic for soft fabrics; metal for durability and a premium look.

Review product specs and measure twice before adding to cart for a better fit.

Screw-on aglets are a handy DIY option that can provide a neat, durable finish without special tools beyond a small screwdriver:

1. Trim clean: Cut the lace end straight and remove frays.
2. Compress the tip: Pinch the lace end (or wrap a thin layer of tape) so it slides into the aglet body.
3. Insert fully: Push the lace all the way into the tip for maximum grip.
4. Tighten gently: Turn the set screw until snug. Avoid overtightening to prevent damage.
5. Test and retighten: Give a light tug. Check again after the first wear and retighten if needed.

Lace thickness and texture can affect hold. If you prefer tool-free options, crimp caps, open-mouth tips, or heat-shrink sleeves are also available at Walmart.