“35 x 60” refers to width by length. For an inside mount, measuring accurately helps you pick the right size.

1. Measure width in three spots: top, middle, and bottom of the opening. Use the narrowest measurement.
2. Measure height in three spots: left, center, and right. Use the longest measurement.
3. Check mounting depth: Make sure your frame is deep enough for the brackets listed on the product page.
4. Review product sizing notes: Some listings provide an “actual” width; follow the model’s guidance rather than making your own deductions.

For outside mount, measure the area you want to cover and add extra for better light control. Results can vary by window conditions.

These terms describe how much light your 35 x 60 blinds or shades let through.

• Light filtering: Softens and diffuses sunlight while keeping spaces bright. Often seen with vinyl mini blinds and some shades.
• Room darkening: Dims the room and helps reduce glare. Good for privacy and TV rooms, but some light may show at edges or between slats.
• Blackout: Designed to block most light, better for bedrooms or media spaces. Performance can depend on fit, color, and whether you choose inside or outside mount.

Pairing a snug outside mount or layering with curtains can further improve light control, but outcomes vary by setup.

Many 35 x 60 options on this page are cordless, which can reduce the risks associated with dangling cords.

• No hanging cords: Lowers the chance of entanglement compared to corded designs.
• Simple operation: Lift and lower from the bottom rail, and tilt via a wand on many models.
• Secure mounting: Install brackets per the instructions and check hardware periodically.
• Room setup: Keeping furniture away from the window area can help limit climbing access.

While cordless designs can enhance safety, always follow the specific product’s guidelines for installation and use. Performance and suitability may vary by household and window layout.

Both slat sizes can provide privacy, but they behave differently.

• 1-inch mini blinds: More, smaller slats create a tighter look and precise light control. When closed, they offer good privacy, though thin slats and small gaps may allow a bit of glow.
• 2–2.5-inch slats: Fewer, wider, and often thicker slats can block more light when tilted closed and create a bolder look. They may need more mounting depth.

If privacy is your priority, consider room darkening or blackout options in these sizes and decide on an inside vs. outside mount based on your window. Results depend on fit, color, and room lighting.

Routine care can help your 35 x 60 vinyl mini blinds or faux wood blinds look fresh without much effort.

• Dust regularly: Close slats and wipe with a microfiber cloth or use a vacuum’s brush attachment on low suction.
• Spot clean: Use a damp cloth with mild soap for smudges; avoid soaking the headrail or mechanisms.
• Dry thoroughly: Wipe dry to help prevent water spots.
• Avoid harsh products: Skip abrasives, strong solvents, or bleach that may damage finishes.

Always check the care notes on the product page. Techniques can vary by material and finish, and gentle methods typically help maintain appearance over time.