Accurate measuring helps you choose a size that fits your window frame neatly.

1. Measure the inside width at the top, middle, and bottom. Use the smallest number.
2. Measure the inside height on the left, center, and right. Use the largest number.
3. Check the product page for the minimum depth needed for an inside mount.
4. Select a listed width that’s equal to or slightly under your smallest width. Many inside-mount blinds are made slightly narrower than the listed size; review each product’s sizing notes.
5. If your frame is too shallow, consider an outside mount for full coverage.

On Walmart.com, you can filter by size, material, and features like cordless or room darkening, then review shipping, pickup, and return options on each product page.

Bathrooms tend to be humid, so materials matter. Options labeled faux wood, vinyl, or PVC are typically designed to handle moisture better than natural wood.

• Look for “moisture resistant” in the product details.
• Cordless designs reduce dangling cords and can be a convenient choice in smaller spaces.
• Check for hardware notes; corrosion-resistant components can be helpful in steamy rooms.
• Room darkening slats can improve privacy while still letting you adjust light.

Wipe off condensation as needed and keep slats slightly tilted open after showers to help air circulate. Product pages on Walmart.com outline materials, mounting depth, and care recommendations so you can choose a bathroom-friendly 2-inch blind with confidence.

Room darkening 2-inch blinds are built to reduce glare and limit light, but they generally won’t create full blackout conditions.

• Tilting the wider 2-inch slats closed helps block more light than smaller slats.
• Some models offer a “no-hole” or hidden-route design that reduces pinholes of light through lift cords.
• Light may still enter around the sides and top, especially with inside mounts.
• Darker colors can appear to block more light than lighter colors of similar construction.

If you want a darker room, pairing room darkening blinds with curtains or a valance can help reduce edge gaps. Product descriptions on Walmart.com detail light control features so you can compare options.

Most cordless 2-inch blinds include mounting hardware and instructions. A basic setup usually takes common tools.

1. Gather a tape measure, pencil, drill/driver, level, and a step stool.
2. Mark bracket locations for inside or outside mount per the instruction sheet.
3. Pre-drill pilot holes and attach the brackets square and level.
4. Click or slide the headrail into the brackets, then secure any locking tabs.
5. Attach the valance (if included) and end caps.
6. Test the lift and tilt functions, and make small bracket adjustments if needed.
7. For drywall outside mounts, use appropriate anchors per instructions. A helper can make wider blinds easier to handle.

Always follow the product’s specific guide; you can also check Walmart.com for manuals or installation videos when available.

Regular, gentle cleaning can keep faux wood 2-inch blinds looking fresh without harsh scrubbing.

1. Close slats facing down and dust with a microfiber cloth or duster.
2. Reverse the tilt and dust the other side for a thorough clean.
3. Use a vacuum’s soft brush on low suction for built-up dust along slats and the headrail.
4. Spot clean with a lightly damp microfiber cloth and mild soap if needed. Avoid soaking components.
5. Dry immediately with a soft towel to prevent water spots.
6. Skip abrasive pads and strong solvents that could dull the finish.

A quick dust every week or two helps minimize grime, so deeper cleanings stay simple. Product care notes on Walmart.com offer additional guidance specific to each blind.