A 17 x 24 inch opening is a medium poster size—about 1.4 feet by 2 feet (408 square inches). It works well for vertical or horizontal art and photos.

• Opening size vs. outer size: Frame listings usually refer to the artwork opening (17" x 24"). The outer dimensions are larger and vary based on moulding width and style.
• Wall scale: It’s larger than an 11" x 14" but smaller than many standard 24" x 36" posters, so it fits nicely above desks, in entryways, or grouped in a gallery wall.
• Tip: Check the product details for exact outer measurements and orientation options.

Converted to metric, a 17 x 24 inch opening is approximately 43.2 x 61.0 cm (17" = 43.18 cm; 24" = 60.96 cm). This helps if your artwork is measured in centimeters.

• Opening vs. overall size: The listed size typically describes the art/photo opening. The overall frame size will be larger and depends on moulding width and design.
• Rounding: Product specs may round to the nearest millimeter or tenth of a centimeter.
• Tip: If you need a precise fit in centimeters, review the product description for the opening and the outer dimensions before ordering.

A2 paper measures 42.0 x 59.4 cm, which is about 16.5 x 23.4 inches. Frames designed for A2 are sized to fit that sheet with or without a mat.

• Compared to 17 x 24: A2 is slightly smaller than 17" x 24" (about 0.5" narrower and 0.6" shorter). If you place A2 art in a 17 x 24 frame, you’d typically use a mat cut to A2.
• Fit check: Always verify frame opening size and mat opening size in the product details.
• Mat note: Mat openings are often cut slightly smaller than the listed size to hold artwork in place.

The height matches, but the width doesn’t. A 16 x 24 poster is 1 inch narrower than a 17 x 24 frame opening, so it would leave gaps on the sides if you don’t use a mat or spacer.

• Best approach: Use a mat with a 16 x 24 opening in a 17 x 24 frame to keep the poster centered and secure.
• Alternative: Choose a frame that matches 16 x 24 exactly.
• Tip: Check the product description for mat compatibility, backing materials (e.g., acid-free), and any included mounting accessories.

Good hanging starts with the right hardware and wall prep. Because moulding, glazing, and backing vary, the weight can differ by style.

• Use suitable anchors: For drywall, consider anchors rated for the frame’s weight; into studs, use wood screws. Two hooks can help reduce tilt.
• Check included hardware: Many frames include sawtooth hangers, D-rings, or wire—follow the product’s instructions.
• Level and measure: Mark spacing with painter’s tape and use a level for alignment.
• Environment: Avoid excess humidity and direct sunlight; UV-protective acrylic can help reduce fading, but results may vary.