RAM Mounts(445)

Start with where you’ll attach it, then match the base and arm to your device and conditions.

• Car: A twist‑lock suction base works well on clean glass or other smooth, non‑porous surfaces. For textured dashboards, consider using a compatible dash disk. Shorter arms usually reduce wobble.
• Bike/Motorcycle: Choose a rail/handlebar clamp sized to your bar diameter. Tool‑free clamps are convenient for swapping between rides, while bolt‑on styles can feel more permanent.
• Boat/Kayak: Track bases or clamp bases are popular for gear tracks and rails. In wet or corrosive environments, look for hardware described as corrosion‑resistant.

Position the setup so it doesn’t block your view or controls. Local laws vary, so it’s a good idea to check regulations and follow manufacturer instructions.

They can, but it depends on the holder’s grip range and design. Here’s how to check:

• Measure your device with the case on: Note width, height, and thickness.
• Compare to the holder’s spec: Look for the listed grip range. For larger phones or rugged cases, search for models labeled “large” or “XL.”
• Choose a suitable style: Adjustable clamp or spring‑loaded grips accommodate different cases; form‑fit cradles are slimmer but more size‑specific.
• Mind buttons and ports: Ensure side grips won’t press volume or power keys.
• Plan for your route: In high‑vibration use, a safety tether can add extra security.

Results vary by case shape and material, so measuring before you buy usually leads to a better match.

These sizes refer to the ball diameter in a modular mounting system.

• 1-inch (often called B size): Compact and lighter. It’s commonly used for phones, small GPS units, and lighter accessories where flexibility matters.
• 1.5-inch (often called C size): Larger interface that can offer more holding power for heavier gear—like tablets, fishfinders, or use in higher vibration.

Tips:

• Keep the ball size consistent across your base, arm, and device holder for compatibility.
• Heavier devices or rougher conditions may benefit from the larger size, while lighter setups may feel more nimble with the smaller one.

Actual performance depends on device weight, arm length, and how and where you mount it.

Good prep and placement can make a big difference, but outcomes can vary with surface and conditions.

• Clean both surfaces: Degrease glass with mild soap or isopropyl alcohol. Wipe the suction pad clean and dry.
• Use smooth, non‑porous surfaces: Textured dashboards can be challenging; a compatible dash disk or adapter plate may help.
• Mount correctly: Press firmly and engage the twist‑lock (if included). A light, clean moisture film can sometimes improve adhesion.
• Mind temperature and load: Heat, cold, and long arms can reduce holding power. Shorter arms typically vibrate less.
• Re‑seat periodically: For long trips, remove and re‑apply as needed, and inspect for wear.

Always position mounts so they don’t obstruct your view or safety features.

Think of it as building three parts that work together: a base, a connecting arm, and a device holder.

• Pick a base: Suction for smooth glass, clamp or rail for bars, track bases for gear tracks, or adhesive/fixed bases for permanent spots.
• Choose an arm: Short, medium, or long. Shorter arms usually reduce movement; longer arms add reach.
• Select a holder: Phone, tablet, GPS, or camera holders are available; match the size and mounting style.
• Match ball size: Keep ball sizes consistent (e.g., 1‑inch with 1‑inch components) to maintain compatibility.
• Check patterns: If your device uses a specific hole pattern or adapter shape, match it to the base/holder.

You can find individual components on Walmart.com; filter by device type, ball size, and mounting surface.