System Overview
The Rockville car audio package combines a DV8K6D1 pre-loaded dual 8-inch subwoofer enclosure with an RD1000.1 mono block Class D amplifier and an RWK41 4-gauge complete amplifier installation wiring kit. The loaded enclosure comes pre-wired internally to a 1-ohm final impedance load, allowing direct terminal connection to the mono block amplifier. The complete three-item bundle provides one loaded dual 8-inch enclosure, one mono amplifier, and one 4-gauge wiring kit.
Loaded Enclosure Power and Motor
The DV8K6D1 enclosure contains two pre-installed W8K6D4 V2 8-inch subwoofers delivering 700 Watts RMS total power handling and 2800 Watts peak power capacity. Each woofer assembly incorporates a 2-inch black aluminum voice coil wound with 100 percent OFC copper wire, a 70-ounce double-stacked magnet structure, a fiber-reinforced non-pressed paper cone, a thick foam surround, black cone stitching reinforcement, and a vented T-yoke for heat dissipation. Acoustic metrics include an 83.4dB sensitivity rating, a 44Hz to 1.5kHz frequency response range, and 15mm of one-way XMAX excursion.
Enclosure Construction and Design
The DV8K6D1 vented enclosure is constructed using 3/4-inch MDF panels for the main body and a 1-inch MDF front baffle panel to prevent driver flex. The front face features a thick plexiglass viewing window equipped with selectable white or blue interior LED lighting. The cabinet is wrapped in black carpet, tuned to 34Hz, and equipped with 10-gauge copper push terminal connectors. External dimensions measure 11.14 inches high by 23.74 inches wide, with a depth slanting from 9.17 inches at the top to 11.9 inches at the bottom.
Mono Block Amplifier Features
The RD1000.1 mono Class D amplifier delivers Dyno-Certified power outputs of 1000 Watts RMS at 1 ohm, 700 Watts RMS at 2 ohms, and 420 Watts RMS at 4 ohms with under 0.5 percent THD. Controls consist of a 45Hz to 200Hz low-pass crossover filter, a 10Hz to 50Hz subsonic filter, a 0dB to 12dB bass boost centered at 45Hz, and a metal dashboard bass remote with a real-time clipping LED indicator. The chassis features a high-speed MOSFET power supply, Tiffany-style RCA inputs, IC-controlled protection circuitry, 4-gauge power terminals, 8-gauge speaker terminals, four 25-amp Maxi fuses, and dimensions of 11.5 inches long by 4.9 inches wide by 1.8 inches high.
Wiring Kit Components
The RWK41 4-gauge wiring kit includes a 17-foot 4-gauge translucent blue power cable, a 3-foot 4-gauge ground wire, a 17-foot 100 percent copper twisted-pair RCA cable, a 17-foot 18-gauge remote lead wire, 7 feet of split loom tubing, a gold-plated AGU fuse holder, a 60-amp AGU fuse, and an extra 100-amp AGU fuse. Included hardware accessories feature wire ties, ring terminals, butt connectors, spade lugs, and a firewall grommet.