A rear wiper helps keep your back window clear so you can see out the rearview mirror in rain, snow, or dusty conditions. It’s common on hatchbacks, wagons, and SUVs.

• What it clears: Light rain, road spray, frost, and residue that collect on rear glass.
• How it works: A short blade on a pivoting arm moves across the back window, powered by a small motor.
• Typical size: Many rear blades are shorter than front blades and often fall in the 10–16 inch range, depending on the vehicle.
• Why it matters: A fresh rear blade can help improve visibility, especially in bad weather. Many drivers replace theirs about yearly, though timing varies by climate and use.

The rear blade size can vary by Prius model year, so a quick check helps you pick the right fit.

1. Check your manual: The owner’s manual usually lists the rear wiper length.
2. Measure the existing blade: Remove or lift it and measure end-to-end in inches.
3. Search by vehicle details: Use your year/make/model with “rear wiper blade” when browsing to narrow results.
4. Match the connector: Compare your arm’s attachment style (e.g., small top-lock or pin) with product photos.
5. Choose rear-specific blades: Rear blades are shorter and shaped for the back glass.

On Walmart, you’ll find a range of rear wiper lengths. Matching the length and connector can help you select a compatible option for your Prius.

Fit depends on your Subaru Crosstrek’s model year and the arm’s connector style. Here’s a quick way to choose:

• Confirm the year: The rear blade length can change with different generations.
• Pick a rear-specific blade: Shorter blades are designed for rear glass and work differently than front blades.
• Check the connector: Compare your arm’s attachment with the product’s adapter images and notes.
• Consider your climate: All-season rubber can help with year-round use; winter-focused designs may resist ice buildup.
• Verify after install: Run the wiper with washer fluid to check for full, smooth contact.

Browsing by year/make/model and matching the connection style can help you find a compatible rear blade for a Crosstrek.

For an older SUV like the 2003 Highlander, fitment comes down to length and connection type.

• Check the manual and measure: Confirm the rear blade size in the owner’s manual, then measure your current blade to double-check.
• Inspect the arm: Older arms may have wear or weaker spring tension. If the blade doesn’t press firmly, the arm may need attention.
• Match the connector: Compare your arm’s attachment to product photos to ensure a compatible adapter.
• Choose rear-specific design: Rear blades are tuned for the back glass and usually shorter than front blades.

When browsing, use the vehicle’s year/make/model plus “rear wiper blade” and verify size and connector before purchasing.

Most rear blades go on in a few careful steps. Results may vary by vehicle, so consult your owner’s manual if needed.

1. Park safely: Turn the car off and set the parking brake.
2. Protect the glass: Place a towel on the rear window.
3. Lift the arm gently: Don’t force it—many rear arms only lift partway.
4. Release the old blade: Press the tab or pin and slide it off.
5. Attach the new blade: Align the adapter, push until it clicks, and tug lightly to confirm it’s secure.
6. Lower and test: Lower the arm carefully and run the wiper with washer fluid to check contact.

Avoid letting the arm snap back to prevent glass damage.