Most pallet strapping kits include the core tools you’ll need. The right tool depends on your strap type and width.

• Plastic (PP/PET) strapping: Typically uses a tensioner to tighten the strap and a sealer/crimper with metal seals. Some all-in-one battery tools tension and weld plastic strap without seals.
• Woven/composite cord: Uses a tensioner and phosphated buckles instead of seals, so you can re-tension if needed.
• Steel banding: Requires steel-rated tensioner, sealer (for open/semi-closed seals), and a strap cutter.

Optional add-ons like corner protectors and a dispenser can help speed up work and protect edges. Match your tools to the strap material and listed width for best compatibility.

Choose by load weight, surfaces, and handling conditions. Different straps offer different performance.

• Steel banding: Good for very heavy, rigid items and sharp edges. It’s strong but requires careful handling.
• Polyester (PET): High-strength plastic with good tension retention. Often chosen for medium to heavy loads.
• Polypropylene (PP): Lightweight and economical for lighter loads and general bundling.
• Woven/composite cord: Flexible, forgiving on surfaces, and commonly paired with buckles for adjustable tension.

Also consider strap width (e.g., 1/2", 5/8", 3/4") and the product’s listed break strength. Using edge protectors can reduce corner damage and help tension hold. Reviewing the strap’s specs on the product page can help you match it to your pallet.

On packaging pages, “banding” and “strapping” are often used interchangeably for securing pallets. The practical differences usually come down to materials and how they’re closed.

• Steel banding: Often called steel strapping too; uses open or closed metal seals and steel tools.
• Plastic strapping (PP/PET): Secured with metal seals and a sealer, or via battery tools that weld the strap.
• Woven/composite cord: Typically paired with buckles instead of seals and tensioned with a manual tool.

Pick based on load weight, surface sensitivity, and tool preference. Product titles and descriptions on Walmart.com list the strap type and compatible closures, which can help you compare options.

Basic steps can help you get a secure wrap while staying safe. Exact steps vary by kit and strap type.

1. Prep: Wear gloves and eye protection. Stage your strap, tools, and any corner protectors.
2. Thread: Run strap under and around the pallet, keeping it flat and untwisted.
3. Tension: Use the tensioner to snug the strap. Add seals (PP/PET/steel) or a buckle (woven/composite) as directed by your kit.
4. Close: Crimp seals with a sealer, or complete the cycle on a battery tool. Avoid over‑tensioning.
5. Cut & secure: Use a strap cutter and keep hands clear. Tuck strap tails.

Corner protectors can reduce edge damage and help maintain tension, but results can vary by load and conditions.

Yes—Walmart.com carries replacement metal seals, buckles, and strapping coils that pair with many kits. To find a good match, check these details:

• Strap type: Steel, PET, PP, or woven/composite. Seals and buckles are material-specific.
• Strap width: Common widths include 1/2", 5/8", and 3/4". Match the listing exactly.
• Seal style: Open, closed, or serrated (for plastic); verify what your sealer accepts.
• Tool compatibility: Confirm the closure works with your tensioner/sealer or battery tool.

You can also find corner protectors and dispensers to round out your setup. Checking your kit’s product page or manual for specifications can help you choose the correct replacements.