Prolube(15)

These shop lubrication tools are built for dispensing oils and grease across a range of tasks. Performance depends on matching the tool to the job and using it within its ratings.

• Hand-held oilers come in sizes around 500–1,000 mL with 9‑in spouts for controlled dosing.
• Some lever and pistol grease guns list 5,000–6,000 psi output for standard fittings.
• Air-operated pumps show ratios like 50:1 and pressures up to 7,500 psi.
• Electric pumps may list flow near 6 GPM and oil‑compatible materials.

Review the product specs and customer feedback on the item page, and follow maintenance guidelines. Proper couplers, seals, and storage can help reliability, but results vary by use conditions.

Pick the spout style based on reach and control, then size for how often you want to refill.

• Flexible spout: Great for tight or angled spots. Options include 8–9 in lengths on hand-held oilers, helping you navigate around obstructions.
• Rigid spout: Better for precise aim and steady flow into open or easily accessible ports.
• Capacity: Around 500 mL is light and portable; 1,000 mL reduces refills. Larger measure oilers (e.g., ~6,000 mL) suit bench or shop use.

Check the fluid type you’ll dispense, spout length, and any included couplers. Confirm compatibility in the item’s specifications before ordering.

Setup can vary by model, so use the manual as your primary guide. These general steps can help with many air‑operated grease pumps:

1. Verify the pail size (e.g., 16‑gallon) and install the rubber‑lined follower plate if included.
2. Secure the pump in the drum, align the pickup tube, and tighten fittings.
3. Connect the air line through a regulator and filter, using the listed thread size (often 1/4 in. NPT).
4. Prime the pump, attach a rated hose/coupler, and test at low pressure.
5. Monitor output; many systems specify high pressure potential, so keep hands and eyes clear.

Wear appropriate PPE, depressurize before servicing, and check for leaks. Actual setup and performance depend on your specific model and air supply.

These tools are generally designed for lubricants and other noncorrosive fluids, but always verify the exact use case on the product page.

• Oils and grease: Grease guns and oilers are intended for these applications.
• Antifreeze and noncorrosives: Some lever drum pumps are labeled for antifreeze and similar noncorrosive fluids.
• Materials: Certain oil pumps list components like ZAMAC, stainless, nitrile, and neoprene, which are commonly used with petroleum oils.

Check the chemical compatibility, temperature range, and seal materials in the specifications. Avoid using with corrosive or flammable fluids unless the item explicitly lists that rating. When in doubt, refer to the product documentation.

You can browse compatible accessories on the same category page and individual item listings.

• Look for grease fitting assortments (inch sizes) if you need replacement zerks.
• Adapters such as quick‑connect or recessed‑lube styles can help in tight spaces.
• Match thread types and sizes (e.g., 1/4 in. NPT on some pumps) and ensure the pressure rating meets your tool’s spec (5,000–7,500 psi items are common).

Use the filters to narrow by type, and check each product’s compatibility notes. Availability can vary by location, so consider online ordering with pickup or delivery if local stock is limited.