FMS 1:18 FCX18S Chevrolet K10 S V2 RTR Black

This Chevrolet K10S has an exquisite appearance, with details and decorations abound, making you feel like you are in a miniature world. It uses a spacious cab and a trapezoidal beam chassis like the real car. The two-tone body is retro and high-end; the parts such as the front grille, front and rear bumpers, rearview mirrors, etc. are all electroplated to give a chrome look and finish; it uses a light control plug-in consistent with the real car light effect; the headlights, turn signals, and taillights can all be changed freely according via the transmitter; the tailgate can be opened and closed, which is convenient for loading various 1:18 simulation parts such as motorcycles, kayaks and various camping equipment; there is ample space under the hood, so the electronic configuration is clear at a glance, and it is convenient for daily maintenance and upgrades; it matches soft large-size all-terrain tires with high-reduction electroplated wheels, enabling users to trail leisurely or race at high speed on any terrain. The FCX18S climbing chassis restores the original car’s off-road performance and control experience. The FCX18S chassis uses metal beams, metal tie rods (6pcs), metal steering tie rods and metal steering links to maintain high stability in extreme environments. Its power system is mid-mounted, with a low center of gravity. The FCX18S comes with a straight axle by default, but it can also be replaced with a planetary gear differential, with high-viscosity silicone oil, to simulate the driving effect of an LSD limited slip differential. After installing the differential, the extreme climbing ability will be reduced, but it can achieve a smaller turning radius and more stable high-speed driving quality. It has a two-speed shifting function, which is operated by a 9G servo. The low-speed gear offers strong torque, enabling steep climbing. The high-speed gear is great for racing on flat ground.  This Chevrolet K10 S also coincides with the release of numerous upgrade and modification parts, and you can create your own exclusive pickup truck according to your preferences and needs. A metal differential offers more precise driving. An optional metal universal join drive shaft increases durability. Metal gears enable more power to be transmitted through the car. Brass wheel hub weights make the FCX18S more stable. A variety of trailers will also be available at launch. In short, let your imagination run wild and create the remote control car of your dreams. FMS Chevrolet K10 S is a static model that can trail, race and crawl.  Features： ●GENERAL MOTORS LLC LICENSED PRODUCT ●POWER CONFIGURATION INCLUDES 3-IN-1 RECEIVER/ESC/LIGHT CONTROL, 180 BRUSHED MOTOR AND 7.4V 900MAH BATTERY  ●FCX18S CRAWLING CHASSIS  ●METAL BARS (6PCS) AND METAL STEERING ROD & LINKAGE  ●HEADLIGHTS, TURN SIGNALS, TAILLIGHTS, MULTIPLE LIGHT EFFECTS AND CONTROL MODES  ●TWO-SPEED TRANSMISSION  ●PORTAL AXLES (METAL GEAR)  ●BALL BEARINGS FULL SET (24PCS)  ●METAL-GEAR STEERING SERVO  ●FOUR-LINK SUSPENSION  ●COIL SPRINGS + METAL OIL DAMPER  ●4WD  ●RIGID METAL GIRDER  ●OPENABLE HOOD ●OPENABLE TAILGATE ●OPTIONAL MODIFICATION PARTS, LIKE METAL, DIFFERENTIAL, METAL UNIVERSAL JOINT DRIVE SHAFT, METAL GEARS, BRASS WHEEL COUNTERWEIGHTS AND TRAILERS (THREE STYLES) What's in the box： 1 x 1:18 FCX18S K10 S 1 x MG41-BS Transmitter 1 x R4A1 Receiver (installed) 1 x 180 Brushed Motor (installed) 1 x 7.4V 900mAh Battery (installed) 1 x USB Battery Charger 1 x Hex Wrench Socket 1 x Product Manual Needed To Complete： 4 x AAA Batteries for Transmitter