Focus Foodservice FF2442SSS 24X42 STAINLESS STEEL SOLID SHELF

Our solid Shelf are constructed of stainless steel with ultra-durable die-cast corners for extra strength. The heavy-duty stainless steel round wire Shelf are ideal for any storage application, dry or wet arnd are constructed of commercially rated stainless steel wire. Shelf 48 in. and longer include center truss support for additional strength and durability. Both Solid and Wire Shelf can also be used with our HDS-Plus High Density Shelving System.

• Design - The heavy-duty commercial grade solid stainless steel combined with the die-cast corners gives these Shelf the strength and durability to handle almost any storage operation.
• Versatile - Our shelving can change as quickly as your needs change. By using various sizes, hundreds of shelving configurations become possible.
• Fast and Secure Assembly - Stainless steel posts with the double groove visual guide feature, have circular grooves at 1 in. (25mm) intervals and are numbered at 2 in. (50mm) intervals. A tapered split sleeve (plastic) snaps together around each post. Tapered openings in the shelf corners slide over the tapered split sleeves to lock on the shelf. Shelf is assembled in minutes without the use of any special tools.
• Shelf Accessibility - Shelf can be adjusted at 1 in.(25mm) intervals along the entire length of the post.
• Durable - Constructed of Stainless Steel panel with die cast aluminum corners.
• Adjustable Feet - Bolt levelers compensate for uneven surfaces.
• Strength - Each shelf up to 48 in. in length is rated to supportup to 800 lbs. of uniformly distributed weight. Shelf longer than 48 in. support 600 lbs.
• Pack of 1
• Size - 24 in. x 42 in.

• Step 1 - For Mobile version, install casters into bottoms of posts.
• Step 2 - Choose the desired height of the bottom shelf (for added stability, it is recommended that the bottom shelf is installed no more than 6 in. from the floor and the top shelf no more than 6 in. from the top) Snap two (2)tapered Shelf, with the word UP on top, at the desired height on each post. Shelf can be adjusted every 1 in. (Note - Double grooves in the posts are placed every 8 th groove for simple shelf height reference.)
• Step 3 - Place shelf on its side, making sure the wider portion of the four (4) round shelf collars are facing the bottom of the unit, slide the top of the posts through the round shelf collars on each corner of the Shelf. Push the Shelf firmly onto the tapered sleeves.
• Step 4 - After installing the bottom shelf, set the unit upright.
• Step 5 - Snap the tapered sleeves into place on posts at the next desired shelf height. Slide the shelf down from the top of the posts onto the tapered sleeves and repeat this step for the remaining Shelf. (Note - A rubber mallet may be used to tap each corner of the Shelf so they firmly install onto the tapered sleeves. The leg levelers may need to be utilized in order to make the unit level or flush against the wall)

• Heavy Objects must be placed - Not dropped - Onto the Shelf.