Seville Classics UltraHD® Heavy Duty Commercial Lighted Workcenter Workbench w/ Wood Top and Pegboard, White, 48" W x 24" D x 65.5" H

I had the grill in the picture for years. The expense of building an island chose to be too much. The 32 inch grill fit perfectly after I cut out a piece of the top. Not wanting to waste the drawers I built a custom shelf to rest on the bottom horizontal supports. I then attached the drawers to the underside of the shelf. It makes a perfect place to put the propane tank. I used the wheels off of a 36 inch workbench to put on this 48 inch. Happy grilling!!!

Not too complicated to put together for me (60ish woman). Just listen to your fave music and go to work! All parts are labeled, however the Drawer Base Panel (bottom surface of drawer) was not marked with "Top" or "Bottom" and I mistakenly placed the flat surface of the drawer base facing down (contoured side was facing up), which I went back and corrected. For STEP 11 (Insert Drawer), I didn't see the written instructions to secure the 2 (#15) screws in each side of the inner track of the drawer sliders (i.e., securing the track TO THE drawer) but figured it out bc I had a few #15 screws still left and there were screw holes w/o any screws :) I later saw the photo of the #15 screws to place on the inner track/drawer. For STEP 15 (Place (#45) Power Strip), the 2 "stud screws J" do not hook the (#45) Power Strip well at all. This was disappointing that the Seville Classics crew let this fly. Initially I thought the plastic pieces of keyholes would depress, allowing the stud screws to "lock in", but the plastic piece is fixed and immovable. I'll probably have to add a velcro strip to the Pegboard panel and to the back of the Power Strip to stabilize, otherwise the Power Strip just falls off the stud screws. :/ There is a small rough spot on the Hardwood Board Top (the workbench wood surface) so not sure what happened there with the Polyurethane coat finish; doesn't affect the use of the WorkCenter. Overall, I love the lighted WorkCenter and the ability to charge tools/batteries. I opted for the Seville Classics UltraHD 3" Rolling Swivel Wheels (Set of 4, 2 Locking) that fit this WorkCenter allowing me to easily move the WorkCenter if needed and place a small tool chest underneath. I have also purchased 3 Seville Classics Storage cabinets in the same finish in an attempt to organize our garage and have it look more uniform.