Fellowes Powershred Shredder Oil / Lubricant – 12 Oz. Bottle

The oil is easy to use. It really helped the shredder as we had never oiled it. I would purchase again when needed. We are using it on a home shredder so it will last a long time. You get a large sized bottle.

Using Fellowes brand oil will help prolong the life of any shredder. I must admit though, I did have an Aurora shredder that finally died a couple months ago after almost 8 years of extreme shredding and not once had I ever applied oil to it. Guess I was lucky...VERY lucky! Since purchasing a Fellowes MS-450Ci, (micro-shredder), its oiled every time a full basket is emptied. I fold an 8 1/2 x 11 piece of paper in half, inserting it about a half inch into the opening. Hold apart, a little bit, the two ends of the paper and quickly apply the oil beginning at the top and moving across as it will run down into the crease. Quickly insert the rest of the way into the shredder. A small amount of oil will run out of the sides, but that's good...it will lubricate the very ends of the cutters. When shredding is complete, I run in reverse and forward respectively, for approx. 15 seconds each mode. Works for me. NOTE: I apply oil beginning at the top of the folded paper letting it run down to make sure all the cutters have a chance of being lubricated. The cutter is cylindrical in shape and revolves. If oil is only applied to the bottom of crease, only a small number of the cutters will be lubricated in one revolution.