Ameriwood Home Franklin 6 Drawer Dresser in Yellow

Received this unit per UPS. Being disassembled, it was in a fairly large, flat package. It was also very heavy. The weight on this unit, per weight label, is 105 pounds. Therefore, this is not a cheap made unit. We suggest that you have a fairly large area, such as the living room to start the assembly process. We placed a large thick blanket on the floor, opened the box, and unpacked slowly so as not to damage anything. We laid out all of the parts by the book and mated each part as listed. You should take your time with the assembly to make sure you follow the instructions carefully because some of the instructions could use a little better clarification. We had one problem with the assembly in that one of the side bracket mount holes had not been drilled. No real problem should you have the same problem. Just carefully measure the opposite end hole then make the measurements on the end with no hole and drill with a 1/16 inch drill bit. Careful not to drill through to other side, and walla, it's done. Every item lines up perfect for a perfect fit. We have the Slate Grey unit in which matches most interiors. It is a very sturdy unit after completed assembly. The drawers slide easily and evenly on the rails. We have assembled other units in the past that the drawer rails didn't line up quite correctly and were difficult to adjust. These haven't needed any adjustment at all. There is ample room in the drawers as well. This unit is by far not a cheap made unit. With all said and done, we do not think one will be dissatisfied with the purchase of one of these units. Simply purchase the color you desire, take your time with the assembly, and enjoy your purchase. Hope this review helps someone with a purchase decision.