Maestro Fix 2K High Gloss Clearcoat, Aerosol, 13.5 oz (400ml)

Maestro Fix 2K High Gloss Clearcoat is a 2K superior high gloss crystal clear finish that has excellent gloss retention.
This product is easy to activate and apply with mechanical polishing possible after 24 hours.

• Genuine 2K isocyanate lacquer
• Brilliant gloss retention
• Scratch resistant
• Gives a spray gun finish every time
• Suitable for solvent or water based basecoat paint

Once activated, use within 24 hours

Check the picture or video to see how to activate the can

Tips for Application

After you activate, shake the can for at least 2 minutes (you should hear the mixing ball inside). Apply in a well-ventilated, dust-free area in 2 or 3 thin coats from 10 inches away. Conduct a spray test first, if the spray pattern is uneven then check the cap is seated properly, and is clean. The nozzle can be cleaned with solvent. After use, turn the aerosol can upside down and spray for a second or two to clear the nozzle and valve. Allow the lacquer 10 minutes to ‘flash-off’ between coats.

Drying time is 60 minutes at 68°F. Wait until the lacquer has fully cured before polishing (24 hours at 68°F- 40 Minutes @105F)

Remember to wear PPE (respirator) and avoid breathing fumes during product application and cure.